Connect with us

Technology

First patient enrolled in landmark clinical study to assess 3D printed models for orthopedic tumor removal

Published

on

Stratasys and Ricoh co-sponsor clinical study comparing the efficacy of 3D printed models to traditional CT or MRI scanning for bone tumor excision planning

EXTON, Pa. and EDEN PRAIRIE, Minn. and REHOVOT, Israel, June 26, 2024 /PRNewswire/ — Ricoh USA, Inc. and Stratasys Ltd. (NASDAQ: SSYS) today announced the enrollment of the first patient in a groundbreaking clinical study aimed to evaluate the use of 3D printed models for orthopedic oncology. The study will assess the efficacy of patient-specific 3D printed anatomical models for preoperative planning and tumor excision in comparison to the current standard of care, which relies solely on CT or MRI imaging.

The joint research aims to demonstrate potential improvements in surgical outcomes, including reduced blood loss, shorter operating time including time under anesthesia, and decreased risk of procedural complications. To do this, clinical outcomes will be compared between an experimental group in which tumors are excised using 3D printed models alongside imaging for planning, and an active comparator group in which tumor excision will be prepped solely with imaging.

Benefits for medical staff and patients

The benefits of 3D printed models in preoperative planning are severalfold and positively impact both medical practitioners and patients alike. Doctors and surgeons benefit from improved and more informed presurgical planning and practicing prior to operations, making complex procedures more efficient, economical and faster. Unlike the limitations of computer images, this enables doctors to represent vital aspects of patient anatomy with life-size physical replicas, granting them the means to simulate procedures and aid in their precision of excision, ultimately reducing the chances of a positive margin. In turn, the availability of accurate 3D printed models to better communicate planned procedures, together with a greatly improved surgical process, helps to improve patient outcome and recovery.

The prospective, multi-center randomized controlled study is expected to run for 12 months and involve up to 150 subjects across three sites. The two sites which have agreed at this time to participate are The Ohio State University Wexner Medical Center and Corewell Health™, based in Michigan. 

“Our never-ending mission is to improve patient outcomes, and that starts with preoperative planning,” said Kyle K. VanKoevering, MD Associate Professor, Otolaryngology – Head and Neck Surgery, Ohio State Wexner Medical Center. “We look forward to participating in this study to examine how 3D printed models may help the medical staff better prepare for surgery as well as improve patient education.”

“Being one of the sites to participate in this study puts us on the forefront of demonstrating new technologies that can advance patient care and improve health outcomes,” said Aws Hammad, M.D., clinical faculty of orthopaedic surgery at Corewell Health William Beaumont University Hospital. “Addressing the challenges that come along with bone sarcomas and utilizing the power of patient-specific 3D modeling is a significant step in not only patient education but as an aid to surgeons for more precise surgical procedures.”

According to Erez Ben Zvi, VP Medical at Stratasys, “The collaboration brings together unparalleled experience and innovation in medical imaging and 3D printing and, if successful, may establish anatomical models as a new standard for patient treatment in tumor removal from bones.”

Gary Turner, Managing Director, Additive Manufacturing, Ricoh USA, Inc., comments, “We are thrilled to co-sponsor this important clinical trial alongside our longstanding partners at Stratasys to further demonstrate the potential impact of 3D patient-specific modeling as well as accelerate adoption of this technology to better serve a broader population.”

About Stratasys
Stratasys is leading the global shift to additive manufacturing with innovative 3D printing solutions for industries such as aerospace, automotive, consumer products and healthcare. Through smart and connected 3D printers, polymer materials, a software ecosystem, and parts on demand, Stratasys solutions deliver competitive advantages at every stage in the product value chain. The world’s leading organizations turn to Stratasys to transform product design, bring agility to manufacturing and supply chains, and improve patient care.

To learn more about Stratasys, visit www.stratasys.com, the Stratasys blog, X/Twitter, LinkedIn, or Facebook. Stratasys reserves the right to utilize any of the foregoing social media platforms, including Stratasys’ websites, to share material, non-public information pursuant to the SEC’s Regulation FD. To the extent necessary and mandated by applicable law, Stratasys will also include such information in its public disclosure filings.

| About Ricoh |

Ricoh is a leading provider of integrated digital services and print and imaging solutions designed to support digital transformation of workplaces, workspaces and optimize business performance.

Headquartered in Tokyo, Ricoh’s global operation reaches customers in approximately 200 countries and regions, supported by cultivated knowledge, technologies, and organizational capabilities nurtured over its 85-year history. In the financial year ended March 2024, Ricoh Group had worldwide sales of 2,348 billion yen (approx. 15.5 billion USD).

It is Ricoh’s mission and vision to empower individuals to find Fulfillment through Work by understanding and transforming how people work so we can unleash their potential and creativity to realize a sustainable future. 

For further information, please visit www.ricoh.com

© 2024 Ricoh USA, Inc. All rights reserved. All referenced product names are the trademarks of their respective companies.

View original content to download multimedia:https://www.prnewswire.com/news-releases/first-patient-enrolled-in-landmark-clinical-study-to-assess-3d-printed-models-for-orthopedic-tumor-removal-302182531.html

SOURCE Ricoh USA, Inc.

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Technology

SoftBank Corp. and TOPPAN Holdings Develop Lightweight, Durable Skin for Solar HAPS Aircraft Wings

Published

on

By

Skin’s compatibility with stratospheric conditions such as extreme UV rays and ultra-low temperatures makes longer HAPS operations possible

TOKYO, April 27, 2026 /PRNewswire/ — SoftBank Corp. (TYO: 9434) (President & CEO: Junichi Miyakawa, “SoftBank”) and TOPPAN Holdings Inc. (TYO: 7911) (President & COO: Satoshi Oya, “TOPPAN Holdings”) jointly developed a lightweight, durable skin for use on solar High-Altitude Platform Station (HAPS) aircraft wings and devised a testing method that replicates the stratosphere’s environment. Test production will go forward, and the aircraft wing skin is planned for use with HTA-type[1] HAPS, which SoftBank plans to deploy for commercial services from 2029 onwards.     

This jointly developed HAPS aircraft wing skin and test method that reproduces stratospheric conditions were made possible by combining SoftBank’s HAPS expertise and TOPPAN Holdings’ know-how accrued over years of creating advanced multi-layered film technology designed for packaging and construction materials. TOPPAN Holdings also leveraged its proprietary technology that evaluates weather resistance. This joint development mitigates film damage (degradation) caused by strong ultraviolet (UV) rays and ultra-low temperatures of almost -100°C. As a result, the aircraft can stay in the stratosphere for longer periods. 

Development Background
HAPS, also referred to as “base stations in the sky,” provide communication services from uncrewed aircraft that remain airborne in the stratosphere. Being able to keep an aircraft with a communications payload airborne for extended periods of time would make it possible to provide an alternative means of communications in the aftermath of large-scale natural disasters, as well as provide communication services to under-connected areas, such as mountainous regions and remote islands. As these platforms operate from the stratosphere at an altitude of approximately 20 km above, they offer wider-area coverage than base stations on the ground, while also providing high-quality, high-volume, low-latency communications superior to satellite-based communications. However, at this altitude in the stratosphere, UV ray and ozone exposure is far greater than at ground level, and with exposure to extremely cold temperatures that sometimes drop to almost -100℃, impaired efficacy due to these environmental factors had been a serious issue with conventional all-purpose skins. Responding to this challenge, SoftBank and TOPPAN Holdings jointly developed a new ultra-lightweight, high-durability skin for aircraft wings capable of withstanding the harsh conditions of the stratosphere, along with a specialized methodology for its evaluation.     

Wing Skin & Evaluation Method Characteristics
1. Use of impact-resistant advanced resin and proprietary structure to achieve both lightweighting and safety
Leveraging converting technology[2] developed for packaging by TOPPAN Holdings, an optimized skin structure was achieved by precisely layering original materials and impact-resistant advanced resin suitable for use at extremely low temperature conditions. The resulting skin weighs the same as or less than average conventional all-purpose skin, and even if damage to the skin were to occur, the break-resistant design keeps damage from spreading, allowing for both a safe and lighter HAPS airframe.    

2. Advanced durability to address harsh stratospheric conditions
SoftBank has contributed real-world data from its stratospheric HAPS flights, including actual temperature measurements and deep ultraviolet (UV-C) ray exposure conditions, and has also defined requirements such as weight reduction and other performance criteria. This has enabled TOPPAN Holdings to design a skin that addresses exposure to the harsh environmental conditions of the stratosphere by applying technology developed for construction materials. These conditions particular to the stratosphere include everything from extremely low temperatures (approximately -50℃ to -95℃) to extreme heat (approximately 100℃) from direct sunlight. The skin is also resistant to short wave UV-C and high-concentration ozone (10-20 ppm, parts per million) exposure that are far stronger than at ground level. This durability will allow for extended HAPS operation periods.      

3. Establishing a testing method that simulates stratospheric conditions to ensure reliability
TOPPAN Holdings leveraged its knowledge of packaging film testing and accelerated durability testing of construction materials, to construct a new test environment that assesses the skin under a simulation of the ultralow temperatures of the stratosphere, while also facilitating the testing of simultaneous exposure from short wave UV rays and the ozone. By using this test environment, it is possible to understand the detailed mechanisms of deterioration particular to the stratosphere and to use that knowledge for improved product design. This understanding and design adjustment makes it possible to carry out a more precise and more reliable evaluation compared to former testing methods.     

Roles of Both Companies
SoftBank
Provide expertise required to evaluate the suitability of the skin as well as expertise on HAPS operations
Supervision of advancing use with HAPS aircraft and transferring advances to practical application

TOPPAN Holdings
Develop and provide skin material suitable for HAPS aircraft
Proposal for evaluation method in stratospheric environment

Future Developments
SoftBank and TOPPAN Holdings will proceed with research to make the skin material developed within the scope of this project even lighter and stronger by fiscal 2027 (the year ending March 31, 2028). Additionally, while evaluating durability in the stratosphere, both companies will also attempt to establish mass production technology capable of ensuring sufficient supply and reliable quality by fiscal 2028. Also, based on testing outcomes, additional functions will be added, and the skin is expected to be used by SoftBank on HTA-type HAPS aircraft that provide commercial services, planned for launch from 2029 onwards. Both companies also plan to apply this skin to other fields that require a high level of durability.

[1] HTA (Heavier-Than-Air) refers to HAPS that remain airborne by generating aerodynamic lift, similar to conventional aircraft.

[2] Converting technology is the process of transforming materials like film into high-function final products through specialized processing such as printing and lamination. 

For more information:
https://www.holdings.toppan.com/en/news/04/newsrelease260427_1.html 

About SoftBank Corp.
Guided by the SoftBank Group’s corporate philosophy, “Information Revolution – Happiness for everyone,” SoftBank Corp. (TOKYO: 9434) operates telecommunications and IT businesses in Japan and globally. Building on its strong business foundation, SoftBank Corp. is expanding into non-telecom fields in line with its “Beyond Carrier” growth strategy while further growing its telecom business by harnessing the power of 5G/6G, IoT, Digital Twin and Non-Terrestrial Network (NTN) solutions, including High Altitude Platform Station (HAPS)-based stratospheric telecommunications. While constructing AI data centers and developing homegrown LLMs specialized for the Japanese language, SoftBank is integrating AI with radio access networks (AI-RAN), with the aim of becoming a provider of next-generation social infrastructure.
https://www.softbank.jp/en/corp/

About the TOPPAN Group
Established in Tokyo in 1900, the TOPPAN Group is a leading and diversified global provider committed to delivering sustainable, integrated solutions in fields including printing, communications, security, packaging, décor materials, electronics, and digital transformation. The TOPPAN Group’s global team of more than 50,000 employees offers optimal solutions enabled by industry-leading expertise and technologies to address the diverse challenges of every business sector and society and contribute to the achievement of shared sustainability goals.
https://www.holdings.toppan.com/en/
https://www.linkedin.com/company/toppan/

 

View original content:https://www.prnewswire.com/news-releases/softbank-corp-and-toppan-holdings-develop-lightweight-durable-skin-for-solar-haps-aircraft-wings-302753970.html

SOURCE TOPPAN Holdings

Continue Reading

Technology

TravelingWiki Foundation Launches SportsFanWiki.com, Providing Disabled Fans with Sports Venue Specific Information in Wiki Format

Published

on

By

The setup of SportsFanWiki.com mirrors the extremely successful format of TravelingWiki.com, which documents disability resources for all FAA Large Sized and FAA Medium Sized hub airports and leverages the launch of a GenAI platform to ensure access across society to expanded disability resources information.

LAS VEGAS, April 27, 2026 /PRNewswire-PRWeb/ — TravelingWiki Foundation announces the launch of SportsFanWiki.com, providing a comprehensive database of sports venue information for fans with Non Visible Disabilities. The setup of SportsFanWiki.com mirrors the extremely successful format of TravelingWiki.com, which documents disability resources for all FAA Large Sized and FAA Medium Sized hub airports.

Leadership of TravelingWiki Foundation is honored to expand to sports venue disability information, offered free to the public and funded via the the sale of cards from the extraordinary careers of Michael Jordan, Lebron James, Shohei Ohtani and Mickey Mantle.

The launch of SportsFanWiki occurs at the same time as the launch of ShoheiAutographs.com; MantleRookies.com; KobeRookies.com; and LebronRookies.com, offering market leading sports card inventory of Shohei Ohtani, Mickey Mantle, Kobe Bryant and Lebron James, respectively. The launch highlights TravelingWiki’s services offered including new Generative AI functionality via a GenAI platform currently in beta testing. The launch also spotlights TravelingWiki’s CardForACause.com platform for free disability resources offered to 20 million Americans for no cost as funded with sports cards sales nationwide via the most two recent White House administrations.

TravelingWiki CEO Jonathan Sutter notes, “Leadership of TravelingWiki Foundation is honored to expand to sports venue disability information, offered free to the public and funded via the the sale of cards from the extraordinary careers of Michael Jordan, Lebron James, Shohei Ohtani and Mickey Mantle, to highlight the critical resources offered via TravelingWiki for the Non Visible Disability community.”

More information about the non-profit work of TravelingWiki foundation is available via visiting http://www.Travelingwiki.com.

Media Contact

Jonathan Sutter, TravelingWiki Foundation, 1 4044033333, jonathan.sutter@travelingwiki.com, http://www.TravelingWiki.com

Jonathan Sutter, TravelingWiki Foundation, 1 4044033333, jonathan.sutter@travelingwiki.com, http://www.TravelingWiki.com

LinkedIn

View original content:https://www.prweb.com/releases/travelingwiki-foundation-launches-sportsfanwikicom-providing-disabled-fans-with-sports-venue-specific-information-in-wiki-format-302753876.html

SOURCE TravelingWiki Foundation

Continue Reading

Technology

AiPPT.com Expands Its Approach to Turning Information into Ready-to-Use Presentations in India

Published

on

By

NEW DELHI, April 27, 2026 /PRNewswire/ — AiPPT.com has refined its platform as demand continues to grow in India for faster ways to turn everyday information into structured presentations.

Across universities, coaching centers, startups, and corporate teams, presentation work often begins with scattered material from notes, documents, and online sources. The platform focuses on converting this workflow into a single process that produces usable slides from raw input. The aim is to reduce preparation time while keeping presentations clear and ready for use.

A Workflow Built Around Content

AiPPT.com allows users to start in familiar ways. A topic can be entered directly, or files such as Word and PDF documents can be uploaded. Web content can also be converted into slides via the URL-to-PPT feature, which turns online information into structured presentations.

The system analyzes the input and builds a presentation with clear sections and logical flow. Slides are generated with formatting applied automatically, reducing manual effort.

For users looking for inspiration, AiPPT.com also provides resources such as easy presentation topics to help them get started more quickly.

From Scattered Information to Clear Communication

In academic and workplace settings, information is often spread across multiple formats. Turning this into a structured presentation can take time.

AiPPT.com simplifies this process. A report can become a meeting deck. A research paper can be turned into a seminar presentation. Startups can quickly build investor materials using the AI pitch deck generator. Educators can create structured lessons with support from tools designed for teaching, such as AI for teachers.

A Flexible System for Editing and Conversion

AiPPT.com supports full editing after generation. Users can adjust text, change slide order, or refine structure. Presentations can also be edited directly through its online PPT editor.

Users can also choose from a range of presentation templates to match different use cases. This flexibility helps users adapt presentations for classrooms, meetings, and digital sharing without rebuilding them.

About AiPPT.com

AiPPT.com is an AI-powered PPT generator focused on turning information into structured presentations. The company builds tools that connect content creation, organization, and presentation in one workflow. Its goal is to support clearer communication by helping users transform ideas and materials into ready to use slides efficiently.

Contact Information
Company Name: PIXELBLOOM PTE. LTD.
Email: support@aippt.com

Website: https://www.aippt.com/

View original content:https://www.prnewswire.com/in/news-releases/aipptcom-expands-its-approach-to-turning-information-into-ready-to-use-presentations-in-india-302753879.html

Continue Reading

Trending