Connect with us

Technology

Governments of Canada and British Columbia Highlight Earthquake Early Warning System Launched in Western Canada to Strengthen Ability to Respond to Earthquakes

Published

on

VANCOUVER, BC, Aug. 29, 2024 /CNW/ – Earthquakes are among the world’s most powerful and destructive natural disasters. When an earthquake hits, a few seconds’ notice can make the difference between life and death and can reduce injuries and protect critical infrastructure by allowing people to take immediate actions to protect themselves and others.

Today, the Honourable Jonathan Wilkinson, Canada’s Minister of Energy and Natural Resources, the Honourable Harjit Sajjan, President of the King’s Privy Council for Canada, Minister of Emergency Preparedness and Minister responsible for the Pacific Economic Development Agency of Canada, and the Honourable Bowinn Ma, British Columbia’s Minister of Emergency Management and Climate Readiness, announced that the Earthquake Early Warning (EEW) system in British Columbia is operational and supporting earthquake preparedness efforts in western Canada.

Building on Natural Resources Canada’s long history as the authoritative source for earthquake information in Canada, the EEW system will notify the public of earthquakes in affected areas through a network of sensors. If there is a potentially harmful earthquake, an alert will automatically be issued through the National Public Alerting System seconds to tens of seconds before strong shaking starts, providing people in British Columbia with a few seconds to “‘Drop, Cover, and Hold On.” NRCan is also working with critical infrastructure operators to ensure they directly receive authenticated, technically detailed earthquake alert messages. Operators will use these warnings to trigger automatic protective measures for trains, bridges and tunnels. Some examples of the protective measures operators may take include halting traffic from using bridges and tunnels, preventing planes from landing, stopping trains to prevent derailment and proactively opening firehouse doors so that emergency vehicles can more quickly respond to the aftermath of an earthquake.

With the system operating in British Columbia, and the full system expected to come online in eastern Ontario and southern Quebec later this year, more than 10 million people in the most earthquake-prone regions of the country will be able to receive EEW alerts. This is a major improvement from the previous system, which could only provide information after an earthquake had occurred.

The EEW system is part of a series of federal investments to strengthen the safety, security and resilience of Canada’s emergency readiness infrastructure and meet shared priorities under the Emergency Management Strategy for Canada (EMS). This strategy was developed in partnership with provincial and territorial governments and in consultation with diverse stakeholders and Indigenous organizations.

The Government of Canada will continue to work together with provinces, territories and Indigenous partners to strengthen mitigation, preparedness and response efforts to natural disasters such as earthquakes and ensure the safety of everyone in at-risk regions of Canada.

Quotes

“Ensuring the health and safety of Canadians is a top priority for the Government of Canada. The Earthquake Early Warning System in British Columbia will help reduce injuries, deaths and property losses. By providing valuable seconds of warning, it will allow Canadians to take protective actions during an earthquake, including alerting people to ‘Drop, Cover, and Hold On.’ EEW messages will also be used to trigger automated actions, such as to open doors, stop trains, sound alarms and close valves. This system will make a real difference in further ensuring the health and safety of Canadians.”

The Honourable Jonathan Wilkinson 
Minister of Energy and Natural Resources

“Timely warnings can be the difference between life and death in the face of earthquakes. This early warning system is a critical investment in Canada’s emergency preparedness and response, empowering individuals and communities to take action and reduce the devastating impact of seismic events. By providing crucial seconds to seek safety, we can save lives, reduce injuries and minimize damage to infrastructure and the environment. This system is a vital tool for emergency responders, healthcare providers and all Canadians, helping us build a more resilient nation from coast to coast to coast.”

The Honourable Harjit Sajjan
President of the King’s Privy Council for Canada, Minister of Emergency Preparedness and Minister responsible for the Pacific Economic Development Agency of Canada

“British Columbia is more prone to earthquakes than anywhere else in Canada, and it’s important that we use the most advanced methods available to protect people across the province. The Earthquake Early Warning system can help save lives and prevent injuries by giving people precious seconds to protect themselves and others. We’ve partnered with the Government of Canada on this life-saving system as part of our ongoing efforts to improve and expand our tools to keep people safe before, during and after emergencies.”

The Honourable Bowinn Ma
British Columbia’s Minister of Emergency Management and Climate Readiness

“The Earthquake Early Warning System will enhance the safety of British Columbians and North Shore residents. This system will provide crucial seconds for people to ‘Drop, Cover, and Hold On,’ which can help prevent injuries, save lives and minimize property damage. Today’s announcement also illustrates how collaboration among governments can help advance and ensure the safety of Canadians.”

The Honourable Terry Beech
Minister of Citizens’ Services

Quick facts

The EEW will issue alerts for earthquakes with a magnitude greater than 5 and an intensity level higher than IV — approximately the magnitude where injury or damage is likely to occur. People may receive an alert but might not feel the shaking or only feel a light shake.An analysis of historical trends suggests that earthquakes with a magnitude greater than 5 occur approximately once per year in Canada.EEW involves the rapid detection of earthquakes, real-time estimation of the shaking hazard and notification of expected shaking.EEW systems cannot predict earthquakes. They do not provide hours of advanced warning or even enough time to evacuate a building. Warning times range from a few seconds to tens of seconds, depending on the distance from the earthquake and how the alert is received. The farther away one is from the epicentre, the greater the warning time.There are approximately 5,000 earthquakes detected across Canada each year. Earthquakes can damage infrastructure, destroy buildings, cause power outages, displace communities and even lead to fatalities.Earthquakes in Canada are most common along the Pacific coast of British Columbia and in the Yukon Territory as well as along the St. Lawrence River and Ottawa River valleys in eastern Ontario and southern Quebec.The Canadian National Public Alerting System (NPAS) is a federal, provincial and territorial system that provides authorized organizations throughout Canada with the capability to warn the public about imminent or unfolding hazards or threats.

Associated links

Natural Resources Canada Earthquake Early Warning SystemStation CatalogueNational Public Alerting SystemEmergency Management StrategyGovernment of Canada Helps Protect Canadians With Earthquake Early Warning System – Canada.caShakeOutBC and GrandeSecousse

Follow us on Twitter: @NRCan (http://twitter.com/nrcan)

SOURCE Natural Resources Canada

Continue Reading

Technology

Faith: The Spark Born by the Yudu Riverside

Published

on

By

BEIJING, Oct. 18, 2026 /PRNewswire/ — An interview from China.org.cn with Wang Xiaohui and David Ferguson on the Long March:

David Ferguson:

This is the Yudu River. One dusk in October, 1934, more than 86,000 soldiers of the Red Army crossed this river and embarked on the Long March, a two-year saga that has left its mark in history.

Yet, lingering here by the river, I am struck by a simple question: If you have faith in a bright future, and reality seems to thwart you at every turn, where do you find the moral strength to keep believing?

Wang Xiaohui:

At dusk on Oct. 17, 1934, an army of more than 86,000 troops gathered along the banks of the Yudu River. Over 800 boats of all sizes floated on the water, bound together with planks collected from villagers’ home gates, timber beams, and even coffin boards reserved for elderly locals. The people of Yudu built this pontoon bridge, determined to help the army led by the Communist Party of China (CPC) cross the river.

At that time, no one knew that the great expedition embarked upon by the banks of the Yudu River would go on to transform China and exert far-reaching influence across the world.

China in the 1920s and 1930s was plagued by chaos and despair.

The Kuomintang (KMT), the ruling party back then, was not capable of unifying the nation, leaving warlords locked in endless fighting. In 1931, Japanese invaders launched an assault on northeastern China, beginning their invasion. Crushed under domestic turbulence and foreign aggression, countless civilians were displaced, with many even starving to death on the streets; in certain regions, severe drought resulted in zero harvests, yet the farmers were forced to pay land taxes assessed for more than a decade into the future.

Amid this turmoil, the only glimmer of hope for the Chinese nation was kindled by the revolution ignited by the Communist Party of China.

The CPC, dedicated to winning liberation for the people and national independence, built contingents of workers’ and peasants’ Red Army troops and revolutionary base areas across the countryside. Impoverished farmers were granted land ownership, as well as unprecedented political dignity. On Nov. 7, 1931, the Chinese Soviet Republic was officially proclaimed in Ruijin, then a small village in southeastern China’s Jiangxi Province, establishing a Soviet system under which workers, peasants and soldiers elected representatives to run regional affairs and make policies.

The communist ideal of a fair society free from exploitation and equality for all blazed like a spark in the darkness; it kindled hopes among impoverished Chinese and became the wellspring of faith that enabled the Red Army — a force made up of poor workers and peasants — to overcome all hardships in the days to come.

Yet, bright as the spark was, it burned thin and fragile at times. Could this flame still endure when the ideals it carried were repeatedly battered by harsh reality?

In September 1933, flocks of warplanes clouded the skies over the Red Army’s revolutionary base areas. By then, Japanese invaders were steadily advancing towards North China, but Chiang Kai-shek’s KMT turned a blind eye to the looming national crisis. They mobilized over a million troops and more than 200 aircraft to launch a massive offensive at the Red Army’s base areas. Over the previous three years, Chiang Kai-shek had mounted four major military “encirclement” campaigns aimed at exterminating the Red Army, but all ended in failure. He was desperate for a pivotal victory to restore his prestige and to wipe out the CPC and the Red Army.

At the time, the commander of the Red Army abandoned mobile warfare tactics pioneered by Mao Zedong and other commanders, opting instead for rigid positional warfare involving conventional head-on clashes. But the reality was, some Red Army units didn’t even possess a single light machine gun; how could they confront the heavily-armed KMT army head-on?

Zhong Ming, a Red Army medic, could never erase the memories of gravely wounded soldiers being carried to his aid station. He remembered how a soldier whose chest was blown open begged his comrades to end his life. At the frontline, a whole battalion of Red Army soldiers religiously followed orders to defend crude earth-and-wood bunkers, but under the constant barrage of KMT artillery and airstrikes, every soldier in the battalion laid down their lives; not a single man survived.

What’s more heart-wrenching is that no matter how fearlessly the Red Army fought, the steep imbalance in military strength, paired with erroneous military command led to irreversible losses. By October 1934, the KMT’s iron-clad encirclement closed menacingly around Ruijin.

Faced with this dead-end, what decision would you make?

This stood as the most agonizing decision for the Red Army. The biggest challenge lay not in sacrificing one’s life for an ideal, but in finding a way to keep the revolutionary cause alive.

To stay meant defeat — the Red Army had no room to maneuver within the Central Revolutionary Base Area. To break through the encirclement, however slim the odds, offered a fighting chance. Preserving the Red Army as a living force mattered much more than clinging to isolated strongholds. Where the spark survives, the path ahead remains lit.

The air already turned chilly in October. Units of the Central Red Army assembled in Yudu to prepare for a strategic shift. The plan was kept strictly classified; none of the soldiers knew they were evacuating the base areas, only sensing an unusual vibe.

At dusk on Oct. 17, crowds lined up at the Yudu riverbank. Tens of thousands of villagers flocked from every corner to see the Red Army off. They walked alongside the marching columns, slipping food like eggs and glutinous rice balls into the soldiers’ pockets, praying for their swift homecoming.

The main force of the Central Red Army set off. Within days, they left behind revolutionary base areas where they had survived, grown and taken root. No one anticipated that the journey they embarked on would become the Long March, a trek spanning over 10 provinces. Still less could anyone imagine that this journey would ultimately pave the way for a brand-new China.

Looking back on this chapter of history, many claim that the Red Army only set out on this expedition because the enemies left them no other choice. To a degree, yes, the Long March was indeed a forced strategic shift, yet this fact does nothing to diminish its greatness and glory.

The ordinary Red Army soldiers had no idea how far they would march, or where they were heading. But they clung firmly to their founding mission: to deliver liberation for the people and independence to the nation. This unswerving conviction kept them from disintegrating through countless perils, sustaining them as they marched into the unknown with resolve.

David Ferguson:

I now realize that faith and ideals untested by harsh reality may have no true substance.

Since its founding, the Communist Party of China has always upheld the realization of communism as its fundamental goal. Despite devastating losses and extreme adversity, the Red Army continued to press forward resolutely and never faltered. Its inner strength came from an unshakable belief in the cause, an unwavering commitment to the founding aspiration, and a profound sense of mission. The Red Army was never fleeing pursuers in search of safety; it was marching forward to a future in which it had a steadfast belief.

Wang Xiaohui:

The Long March went on for two years. The Red Army trekked 25,000 li across some of China’s harshest terrain, but they kept their heads high, seeking hope amid despair and marching towards light through unending darkness. The lofty ideals and sense of mission they upheld have also become the torch that guides generations of CPC members in the following centennial, tempering them into steel as they press forward unswervingly toward national rejuvenation.

That spark lit along the Yudu River has never dimmed since.

China Mosaic
http://www.china.org.cn/video/node_7230027.htm

Faith: The Spark Born by the Yudu Riverside
http://www.china.org.cn/2026-10/16/content_118736835.shtml

View original content to download multimedia:https://www.prnewswire.com/news-releases/faith-the-spark-born-by-the-yudu-riverside-302911977.html

SOURCE China.org.cn

Continue Reading

Technology

Linktel Technologies Highlights Breakthrough 1.6T LPO Performance & Strong Market Pull at OCP 2026

Published

on

By

SAN JOSE, Calif., Oct. 18, 2026 /PRNewswire/ — At the recent 2026 OCP Global Summit, Linktel Technologies showcased its cutting-edge optical interconnect portfolios engineered specifically for next-generation AI computing networks. Among the heavy lineup, Linktel’s 1.6T Linear Pluggable Optics (LPO) solutions commanded immense industry attention, drawing heavy customer interest for their unprecedented energy efficiency, ultra-low latency, and supply-chain resilience.

Spotlight: 1.6T LPO Performance & High Customer Traction

AI data centers face immense scaling pressures, demanding higher bandwidth densities with tighter thermal and power budgets. Linktel’s 1.6T LPO solutions—highlighted by the 1.6T LPO 2DR4—delivered standout performance metrics that captured the spotlight at the summit:

Ultra-Low Power Consumption: Operates with power consumption as low as an impressive 10W, drastically mitigating data center cooling and power loads.Minimal Latency: Features a linear optics architecture that cuts down signal processing delays, making it a critical asset for high-performance AI scale-out fabrics.Enhanced Supply-Chain Resilience: Eliminating the optical DSP mitigates component choke points, ensuring robust scalability for mass deployments.Proven Interoperability: Following its breakthrough performance and multi-switch platform interoperability at the early September 2026 1.6T LPO-MSA Plugfest, Linktel has laid a solid foundation for the 200G-per-wavelength ecosystem.

Surging Market Interest

Throughout OCP 2026, Linktel’s live demonstrations of its 1.6T LPO, LRO, and FRO modules drew crowds of data center architects and industry partners. With volume production already in place, Linktel is fully equipped to meet the exploding market demand for energy-efficient, high-density 1.6T connectivity.

Overview of Other Innovations at OCP 2026

In addition to the heavily requested 1.6T LPO lineup, Linktel showcased two other major high-speed architectural pillars:

12.8T Liquid-Cooled XPO:Featured a live thermal demonstration integrating advanced liquid cooling to guarantee stable operations in high-density AI nodes.As a founding member of the XPO MSA, Linktel is actively scaling XPO series with FRO, LRO, and LPO variants for comprehensive scale-up, scale-out, and scale-across frameworks.6.4T/7.2T NPO Modules:Displayed with covers removed to reveal internal architectural designs supporting both ELS and ILS configurations.Combines compact high density with low power and low latency, backed by an established 6.4T/7.2T NPO roadmap.DMD Technology & Executive Presentation:Linktel Engineer Director Dr. Grace Zhang hosted a heavily attended Executive Session titled “Dispersion Managed Transceiver for Next-Gen AI Fabrics,” detailing cost-effective 800G (20km) and 1.6T (10km) solutions for OCS SuperPOD architectures, as well as the feasibility of 400G per lambda (3km).With its DMD product line already in volume production, Linktel actively calls upon ecosystem partners to join forces in collaborative development. To drive ecosystem maturity, Linktel is open to sharing its U.S.-filed patents, paving the way for industry-wide adoption and advancements in next-gen AI fabrics.

About Linktel Technologies

Linktel Technologies is a global leader in optical transceiver development and manufacturing, supplying high-speed optical I/O connectivity—including pluggable transceivers, optical engines, and ODM/JDM services.

For more information, visit www.linktel.com or follow Linktel Technologies on LinkedIn.

View original content:https://www.prnewswire.com/news-releases/linktel-technologies-highlights-breakthrough-1-6t-lpo-performance–strong-market-pull-at-ocp-2026–302911973.html

SOURCE Linktel Technologies

Continue Reading

Technology

Advanced Manufacturing in Focus: Smart Life and Robotics Take the Spotlight at 140th Canton Fair

Published

on

By

GUANGZHOU, China, Oct. 18, 2026 /CNW/ — Phase 1 of the 140th Canton Fair, themed “Advanced Manufacturing,” opened on October 15 and will run through October 19. As one of the event’s most closely watched sections, the Consumer Electronics and Information Products zone once again serves as a showcase for the latest achievements in China’s manufacturing and technology industries.

Smart Life Solutions Address an Aging and Globalized Market

A highlight of this section is the focus on smart living, which brings together smart solutions designed to support healthier, safer, and more independent lifestyles.

For example, wearable devices and continuous glucose monitoring systems enable convenient tracking of key health indicators such as heart rate and blood glucose levels. Meanwhile, wearable exoskeletons and other AI-powered devices support mobility training and functional recovery. For home and elderly care, companion robots, electric nursing beds and home-use hyperbaric oxygen chambers, offer a combination of daily care, wellness support and lifestyle assistance. All these solutions highlight a growing shift toward technology-enabled living, where health management, personal care, and independent living are becoming more accessible and connected.

Service Robots Demonstrate Expanding Real-World Applications

The Service Robot Zone remains one of the fair’s most popular attractions in this edition.

Among the crowd favorites is a humanoid robot standing roughly 70–80 centimeters tall. With its expressive movements and playful appearance, the robot draws constant attention as it dances, approaches visitors and occasionally performs flips to the delight of onlookers. Behind the product is a company that has overcome key challenges in compact joint modules and modular humanoid robot development. Its independently developed high-power-density joints deliver remarkable agility and explosive movement, while modular architecture provides flexibility for a wide range of future applications.

More broadly, the Service Robot Zone features exhibits spanning a wide range of application areas, including embodied intelligence, specialized operations, urban services, and smart living. Full-size humanoid robots, dexterous hands with multimodal sensing capabilities and wheeled robots highlight the latest advances in artificial intelligence, perception technologies and motion control. For demanding industrial and emergency environments, exhibitors are presenting robotic inspection systems, live-line maintenance robots and underwater propulsion robots designed to improve safety and operational efficiency.

The commercial services sector is also well represented through reception robots, façade-cleaning robots and fully automated coffee kiosks, while everyday life applications include wearable exoskeletons, robotic lawn mowers and educational robots for home use. Together, these exhibits demonstrate how China’s robotics industry is accelerating its transition from technological innovation to large-scale commercialization.

As the 140th Canton Fair gets underway, the showcased innovations highlight China’s growing strength in advanced manufacturing, turning cutting-edge technologies into practical, market-ready solutions for global customers.

For more convenient attendance, please click here for pre-registration:
https://buyer.cantonfair.org.cn/register/buyer/email?source_type=16

View original content to download multimedia:https://www.prnewswire.com/news-releases/advanced-manufacturing-in-focus-smart-life-and-robotics-take-the-spotlight-at-140th-canton-fair-302911955.html

SOURCE Canton Fair

Continue Reading

Trending