Connect with us

Technology

Heat, drought and storms; A summer of extremes and contrasts

Published

on

The Weather Network’s 2025 Summer Forecast

OAKVILLE, ON, May 28, 2025 /CNW/ – It’s time to get out and explore Canada’s great outdoors! After a long winter and a sporadic spring, will we be rewarded with a warm and sunny summer to enjoy our favourite outdoor activities?

The Weather Network’s Summer Forecast calls for warmer than normal temperatures across most of Canada during the months of June, July and August. While spring struggled to deliver any consistent warm weather, most of the country will see a swift transition into the next season.

“This summer will really come through for those who have been longing for warmer weather,” said Doug Gillham, Senior Meteorologist with The Weather Network. “However, this summer will also illustrate the fact that too much hot weather brings many risks. The heat will be excessive at times, especially across western Canada where it will contribute to widespread drought conditions and a heightened risk for wildfires and poor air quality.  Meanwhile, across eastern Canada, warm and humid conditions will help to fuel powerful thunderstorms at times.”

Canadian summers truly are fantastic opportunities to enjoy our spectacular scenery with extended daylight hours and much warmer temperatures. However, it is important to stay informed by regularly checking our detailed local forecasts for updates to ensure a safe and enjoyable summer.

Below is a more detailed look at the conditions expected across Canada this summer:  

Ontario & Quebec – A warm and humid summer is expected which should include a few heat waves, potentially starting before Canada Day. However, we do not expect persistent heat through the summer (except west of Lake Superior). Occasional shots of cooler weather are likely, and the muggy conditions will help to fuel more frequent showers and powerful thunderstorms.  However, the threat for wildfires is a major concern across northern Ontario and if this threat is realized, the fires could have a far reaching impact on the other parts of the country with smoke and a risk for poor air quality at times.

British Columbia – A hot summer is expected across the interior of the province, especially during July and August, but temperatures should be closer to seasonal near the coast.  Rain totals are forecast to be near normal or below normal, so the risk for wildfires, smoke and poor air quality will be an increasing concern as we progress through the season. Scattered thunderstorms will be more widespread at times, which should provide some relief from the dry conditions. However, the storms will also bring a risk for localized flash flooding and lightning which can also ignite additional fires.

The Prairies – A hot and dry summer is expected across most of the region. Widespread drought is a major concern across the central United States and it appears that the drought will extend well north of the border and impact much of the Canadian Prairies as well. This could have a significant impact on agriculture and bring a heightened risk for wildfires with far reaching impacts from smoke and poor air quality.  However, powerful thunderstorms will interrupt the periods of dry weather at times with a risk for localized severe storms.

Atlantic Canada – A warm and humid summer is expected across the Maritimes and western Newfoundland, but occasional cold fronts will bring more refreshing conditions at times. Near normal temperatures are expected for central and eastern Newfoundland.  While there will be some dry stretches, showers and thunderstorms should be frequent enough to bring rain totals to near normal or above normal across the region. We will also be keeping an eye on the tropics. A more typical Atlantic hurricane season is expected, but the anticipated jet stream pattern would bring an elevated risk for a tropical system to impact the region.

Northern Canada – A warm summer is expected across most of the region with above normal temperatures expected across the N.W.T., most of Nunavut, and eastern parts of the Yukon. Near normal temperatures are expected for much of Baffin Island and the western half of the Yukon. We expect that much of the Yukon will see above normal precipitation, but near normal precipitation is expected across the rest of the region. The anticipated heat and stretches of dry weather will bring an increasing threat for wildfires, smoke and poor air quality at times. 

 The Weather Network:  Summer 2025 Forecast

Region

Temperature Outlook

Precipitation Outlook

British Columbia

Above normal central and east;
Near normal west

Below normal southern
interior; Above normal
northwest; Near normal
elsewhere

Alberta

Above normal; Much above
normal south

Below normal south; Near
normal north

Saskatchewan

Above normal; Much above
normal south

Below normal south; Near
normal north

Manitoba

Above normal; Much above
normal south

Below normal south; Near
normal north

Ontario

Above normal; Much above
normal northwest

Above normal south, east and
far north; Below normal
northwest; Near normal
elsewhere

Québec

Above normal

Above normal south and east;
Near normal elsewhere

The Maritimes and
Newfoundland

Above normal; Near normal
central and eastern
Newfoundland

Above normal; Near normal
eastern Nova Scotia and
Newfoundland

Yukon, Northwest
Territories, Nunavut

Above normal; Near normal
western Yukon and northern
Baffin Island

Near normal; Above normal
western Yukon

Canadians can check daily forecasts by visiting www.theweathernetwork.com or by downloading The Weather Network App available on iOS and Android, and creating an account for personalized and up-to-the minute forecasts.

Complete summer forecast details, including regional breakdowns, maps and charts are available on our seasonal page at theweathernetwork.com/summer.

Interview opportunities: The Weather Network meteorologists are available for interviews between May 28-30 to provide additional details and localized insights about this year’s summer forecast.

About Pelmorex

Pelmorex is the company behind the well-known weather brands, The Weather Network, MétéoMédia, Eltiempo in Spain, Otempo in Portugal, and Clima for Spanish-speaking audiences. It helps people, communities and businesses stay informed and safe with fast, accurate forecasts and weather alerts. It also operates Canada’s National Alert Aggregation and Dissemination System, part of the Alert Ready emergency alert system.

Driven by an unwavering commitment to innovation and a vibrant entrepreneurial spirit, Pelmorex has established itself as a global leader in delivering hyper-precise global weather forecasts, personalization and insights to empower people and businesses to make informed, smart and confident decisions amidst the changing and volatile weather.

Through its relentless pursuit of excellence and groundbreaking advancements, Pelmorex continues to redefine the landscape of weather information services, solidifying its status as a trailblazer in the field. 

To learn more, visit Pelmorex.com and follow us on LinkedIn.

SOURCE Pelmorex Corp.

Continue Reading

Technology

Faith: The Spark Born by the Yudu Riverside

Published

on

By

BEIJING, Oct. 18, 2026 /PRNewswire/ — An interview from China.org.cn with Wang Xiaohui and David Ferguson on the Long March:

David Ferguson:

This is the Yudu River. One dusk in October, 1934, more than 86,000 soldiers of the Red Army crossed this river and embarked on the Long March, a two-year saga that has left its mark in history.

Yet, lingering here by the river, I am struck by a simple question: If you have faith in a bright future, and reality seems to thwart you at every turn, where do you find the moral strength to keep believing?

Wang Xiaohui:

At dusk on Oct. 17, 1934, an army of more than 86,000 troops gathered along the banks of the Yudu River. Over 800 boats of all sizes floated on the water, bound together with planks collected from villagers’ home gates, timber beams, and even coffin boards reserved for elderly locals. The people of Yudu built this pontoon bridge, determined to help the army led by the Communist Party of China (CPC) cross the river.

At that time, no one knew that the great expedition embarked upon by the banks of the Yudu River would go on to transform China and exert far-reaching influence across the world.

China in the 1920s and 1930s was plagued by chaos and despair.

The Kuomintang (KMT), the ruling party back then, was not capable of unifying the nation, leaving warlords locked in endless fighting. In 1931, Japanese invaders launched an assault on northeastern China, beginning their invasion. Crushed under domestic turbulence and foreign aggression, countless civilians were displaced, with many even starving to death on the streets; in certain regions, severe drought resulted in zero harvests, yet the farmers were forced to pay land taxes assessed for more than a decade into the future.

Amid this turmoil, the only glimmer of hope for the Chinese nation was kindled by the revolution ignited by the Communist Party of China.

The CPC, dedicated to winning liberation for the people and national independence, built contingents of workers’ and peasants’ Red Army troops and revolutionary base areas across the countryside. Impoverished farmers were granted land ownership, as well as unprecedented political dignity. On Nov. 7, 1931, the Chinese Soviet Republic was officially proclaimed in Ruijin, then a small village in southeastern China’s Jiangxi Province, establishing a Soviet system under which workers, peasants and soldiers elected representatives to run regional affairs and make policies.

The communist ideal of a fair society free from exploitation and equality for all blazed like a spark in the darkness; it kindled hopes among impoverished Chinese and became the wellspring of faith that enabled the Red Army — a force made up of poor workers and peasants — to overcome all hardships in the days to come.

Yet, bright as the spark was, it burned thin and fragile at times. Could this flame still endure when the ideals it carried were repeatedly battered by harsh reality?

In September 1933, flocks of warplanes clouded the skies over the Red Army’s revolutionary base areas. By then, Japanese invaders were steadily advancing towards North China, but Chiang Kai-shek’s KMT turned a blind eye to the looming national crisis. They mobilized over a million troops and more than 200 aircraft to launch a massive offensive at the Red Army’s base areas. Over the previous three years, Chiang Kai-shek had mounted four major military “encirclement” campaigns aimed at exterminating the Red Army, but all ended in failure. He was desperate for a pivotal victory to restore his prestige and to wipe out the CPC and the Red Army.

At the time, the commander of the Red Army abandoned mobile warfare tactics pioneered by Mao Zedong and other commanders, opting instead for rigid positional warfare involving conventional head-on clashes. But the reality was, some Red Army units didn’t even possess a single light machine gun; how could they confront the heavily-armed KMT army head-on?

Zhong Ming, a Red Army medic, could never erase the memories of gravely wounded soldiers being carried to his aid station. He remembered how a soldier whose chest was blown open begged his comrades to end his life. At the frontline, a whole battalion of Red Army soldiers religiously followed orders to defend crude earth-and-wood bunkers, but under the constant barrage of KMT artillery and airstrikes, every soldier in the battalion laid down their lives; not a single man survived.

What’s more heart-wrenching is that no matter how fearlessly the Red Army fought, the steep imbalance in military strength, paired with erroneous military command led to irreversible losses. By October 1934, the KMT’s iron-clad encirclement closed menacingly around Ruijin.

Faced with this dead-end, what decision would you make?

This stood as the most agonizing decision for the Red Army. The biggest challenge lay not in sacrificing one’s life for an ideal, but in finding a way to keep the revolutionary cause alive.

To stay meant defeat — the Red Army had no room to maneuver within the Central Revolutionary Base Area. To break through the encirclement, however slim the odds, offered a fighting chance. Preserving the Red Army as a living force mattered much more than clinging to isolated strongholds. Where the spark survives, the path ahead remains lit.

The air already turned chilly in October. Units of the Central Red Army assembled in Yudu to prepare for a strategic shift. The plan was kept strictly classified; none of the soldiers knew they were evacuating the base areas, only sensing an unusual vibe.

At dusk on Oct. 17, crowds lined up at the Yudu riverbank. Tens of thousands of villagers flocked from every corner to see the Red Army off. They walked alongside the marching columns, slipping food like eggs and glutinous rice balls into the soldiers’ pockets, praying for their swift homecoming.

The main force of the Central Red Army set off. Within days, they left behind revolutionary base areas where they had survived, grown and taken root. No one anticipated that the journey they embarked on would become the Long March, a trek spanning over 10 provinces. Still less could anyone imagine that this journey would ultimately pave the way for a brand-new China.

Looking back on this chapter of history, many claim that the Red Army only set out on this expedition because the enemies left them no other choice. To a degree, yes, the Long March was indeed a forced strategic shift, yet this fact does nothing to diminish its greatness and glory.

The ordinary Red Army soldiers had no idea how far they would march, or where they were heading. But they clung firmly to their founding mission: to deliver liberation for the people and independence to the nation. This unswerving conviction kept them from disintegrating through countless perils, sustaining them as they marched into the unknown with resolve.

David Ferguson:

I now realize that faith and ideals untested by harsh reality may have no true substance.

Since its founding, the Communist Party of China has always upheld the realization of communism as its fundamental goal. Despite devastating losses and extreme adversity, the Red Army continued to press forward resolutely and never faltered. Its inner strength came from an unshakable belief in the cause, an unwavering commitment to the founding aspiration, and a profound sense of mission. The Red Army was never fleeing pursuers in search of safety; it was marching forward to a future in which it had a steadfast belief.

Wang Xiaohui:

The Long March went on for two years. The Red Army trekked 25,000 li across some of China’s harshest terrain, but they kept their heads high, seeking hope amid despair and marching towards light through unending darkness. The lofty ideals and sense of mission they upheld have also become the torch that guides generations of CPC members in the following centennial, tempering them into steel as they press forward unswervingly toward national rejuvenation.

That spark lit along the Yudu River has never dimmed since.

China Mosaic
http://www.china.org.cn/video/node_7230027.htm

Faith: The Spark Born by the Yudu Riverside
http://www.china.org.cn/2026-10/16/content_118736835.shtml

View original content to download multimedia:https://www.prnewswire.com/news-releases/faith-the-spark-born-by-the-yudu-riverside-302911977.html

SOURCE China.org.cn

Continue Reading

Technology

Linktel Technologies Highlights Breakthrough 1.6T LPO Performance & Strong Market Pull at OCP 2026

Published

on

By

SAN JOSE, Calif., Oct. 18, 2026 /PRNewswire/ — At the recent 2026 OCP Global Summit, Linktel Technologies showcased its cutting-edge optical interconnect portfolios engineered specifically for next-generation AI computing networks. Among the heavy lineup, Linktel’s 1.6T Linear Pluggable Optics (LPO) solutions commanded immense industry attention, drawing heavy customer interest for their unprecedented energy efficiency, ultra-low latency, and supply-chain resilience.

Spotlight: 1.6T LPO Performance & High Customer Traction

AI data centers face immense scaling pressures, demanding higher bandwidth densities with tighter thermal and power budgets. Linktel’s 1.6T LPO solutions—highlighted by the 1.6T LPO 2DR4—delivered standout performance metrics that captured the spotlight at the summit:

Ultra-Low Power Consumption: Operates with power consumption as low as an impressive 10W, drastically mitigating data center cooling and power loads.Minimal Latency: Features a linear optics architecture that cuts down signal processing delays, making it a critical asset for high-performance AI scale-out fabrics.Enhanced Supply-Chain Resilience: Eliminating the optical DSP mitigates component choke points, ensuring robust scalability for mass deployments.Proven Interoperability: Following its breakthrough performance and multi-switch platform interoperability at the early September 2026 1.6T LPO-MSA Plugfest, Linktel has laid a solid foundation for the 200G-per-wavelength ecosystem.

Surging Market Interest

Throughout OCP 2026, Linktel’s live demonstrations of its 1.6T LPO, LRO, and FRO modules drew crowds of data center architects and industry partners. With volume production already in place, Linktel is fully equipped to meet the exploding market demand for energy-efficient, high-density 1.6T connectivity.

Overview of Other Innovations at OCP 2026

In addition to the heavily requested 1.6T LPO lineup, Linktel showcased two other major high-speed architectural pillars:

12.8T Liquid-Cooled XPO:Featured a live thermal demonstration integrating advanced liquid cooling to guarantee stable operations in high-density AI nodes.As a founding member of the XPO MSA, Linktel is actively scaling XPO series with FRO, LRO, and LPO variants for comprehensive scale-up, scale-out, and scale-across frameworks.6.4T/7.2T NPO Modules:Displayed with covers removed to reveal internal architectural designs supporting both ELS and ILS configurations.Combines compact high density with low power and low latency, backed by an established 6.4T/7.2T NPO roadmap.DMD Technology & Executive Presentation:Linktel Engineer Director Dr. Grace Zhang hosted a heavily attended Executive Session titled “Dispersion Managed Transceiver for Next-Gen AI Fabrics,” detailing cost-effective 800G (20km) and 1.6T (10km) solutions for OCS SuperPOD architectures, as well as the feasibility of 400G per lambda (3km).With its DMD product line already in volume production, Linktel actively calls upon ecosystem partners to join forces in collaborative development. To drive ecosystem maturity, Linktel is open to sharing its U.S.-filed patents, paving the way for industry-wide adoption and advancements in next-gen AI fabrics.

About Linktel Technologies

Linktel Technologies is a global leader in optical transceiver development and manufacturing, supplying high-speed optical I/O connectivity—including pluggable transceivers, optical engines, and ODM/JDM services.

For more information, visit www.linktel.com or follow Linktel Technologies on LinkedIn.

View original content:https://www.prnewswire.com/news-releases/linktel-technologies-highlights-breakthrough-1-6t-lpo-performance–strong-market-pull-at-ocp-2026–302911973.html

SOURCE Linktel Technologies

Continue Reading

Technology

Advanced Manufacturing in Focus: Smart Life and Robotics Take the Spotlight at 140th Canton Fair

Published

on

By

GUANGZHOU, China, Oct. 18, 2026 /CNW/ — Phase 1 of the 140th Canton Fair, themed “Advanced Manufacturing,” opened on October 15 and will run through October 19. As one of the event’s most closely watched sections, the Consumer Electronics and Information Products zone once again serves as a showcase for the latest achievements in China’s manufacturing and technology industries.

Smart Life Solutions Address an Aging and Globalized Market

A highlight of this section is the focus on smart living, which brings together smart solutions designed to support healthier, safer, and more independent lifestyles.

For example, wearable devices and continuous glucose monitoring systems enable convenient tracking of key health indicators such as heart rate and blood glucose levels. Meanwhile, wearable exoskeletons and other AI-powered devices support mobility training and functional recovery. For home and elderly care, companion robots, electric nursing beds and home-use hyperbaric oxygen chambers, offer a combination of daily care, wellness support and lifestyle assistance. All these solutions highlight a growing shift toward technology-enabled living, where health management, personal care, and independent living are becoming more accessible and connected.

Service Robots Demonstrate Expanding Real-World Applications

The Service Robot Zone remains one of the fair’s most popular attractions in this edition.

Among the crowd favorites is a humanoid robot standing roughly 70–80 centimeters tall. With its expressive movements and playful appearance, the robot draws constant attention as it dances, approaches visitors and occasionally performs flips to the delight of onlookers. Behind the product is a company that has overcome key challenges in compact joint modules and modular humanoid robot development. Its independently developed high-power-density joints deliver remarkable agility and explosive movement, while modular architecture provides flexibility for a wide range of future applications.

More broadly, the Service Robot Zone features exhibits spanning a wide range of application areas, including embodied intelligence, specialized operations, urban services, and smart living. Full-size humanoid robots, dexterous hands with multimodal sensing capabilities and wheeled robots highlight the latest advances in artificial intelligence, perception technologies and motion control. For demanding industrial and emergency environments, exhibitors are presenting robotic inspection systems, live-line maintenance robots and underwater propulsion robots designed to improve safety and operational efficiency.

The commercial services sector is also well represented through reception robots, façade-cleaning robots and fully automated coffee kiosks, while everyday life applications include wearable exoskeletons, robotic lawn mowers and educational robots for home use. Together, these exhibits demonstrate how China’s robotics industry is accelerating its transition from technological innovation to large-scale commercialization.

As the 140th Canton Fair gets underway, the showcased innovations highlight China’s growing strength in advanced manufacturing, turning cutting-edge technologies into practical, market-ready solutions for global customers.

For more convenient attendance, please click here for pre-registration:
https://buyer.cantonfair.org.cn/register/buyer/email?source_type=16

View original content to download multimedia:https://www.prnewswire.com/news-releases/advanced-manufacturing-in-focus-smart-life-and-robotics-take-the-spotlight-at-140th-canton-fair-302911955.html

SOURCE Canton Fair

Continue Reading

Trending