Connect with us

Technology

TAIYO YUDEN Commercializes the HVX (-K) and HTX (-K) Series of Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Capable of Handling Large Currents and High Voltages

Published

on

TOKYO, July 1, 2026 /PRNewswire/ — TAIYO YUDEN CO., LTD. (Representative Director, President and CEO: Katsuya Sase; Head Office: Chuo-ku, Tokyo) has commercialized the new HVX (-K) and HTX (-K) series of conductive polymer hybrid aluminum electrolytic capacitors (hereinafter referred to as hybrid capacitors) that comply with the AEC-Q200 (Note 1) Stress Test Qualification for Passive Components.

These hybrid capacitors are intended for noise suppression and power smoothing in power supply circuits for control functions such as automotive power steering or safety functions such as ADAS.

The new hybrid capacitors offer significantly improved capacitance characteristics over our earlier HVX and HTX series. TAIYO YUDEN have commercialized 46 types of hybrid capacitor, including the 80 V rated type RAHTX181M1RGP5005K (φ12.5 x 16.5 mm; rated ripple current: 3,900 mArms@135°C), with a lineup of seven sizes ranging from φ6.3 x 7.7 mm to φ12.5 x 16.5 mm.

In June 2026, mass production began at the Shirakawa Plant (Nishi-Shirakawa-gun, Fukushima Prefecture) and Aomori Plant (Kuroishi City, Aomori Prefecture) of our subsidiary, ELNA CO., LTD. (President: Masahiro Kohsaka; Head Office: Chuo-ku, Tokyo). Samples are available for 150 yen per unit.

Technology Background
Hybrid capacitors use a conductive polymer and an electrolyte solution as the electrolyte. This composition takes advantage of the low ESR characteristic of conductive polymers and the self-repairing property of anodic oxide film, which is a characteristic of aluminum electrolytic capacitors, achieving both high performance and reliability.

In recent years, the power supply voltage for automotive power circuits has increasingly been set to 48 V to improve power efficiency. Therefore, there is demand for hybrid capacitors capable of handling high voltages and large currents. Furthermore, as the number of power supply circuits required for electronic control systems such as ADAS, and vehicles with electrified powertrains such as EVs, continues to increase, more hybrid capacitors are being used for noise suppression and power smoothing.

To meet this requirement, TAIYO YUDEN has pursued the optimal design for all constituent materials used in its hybrid capacitors and commercialized the HVX (-K) and HTX (-K) series, which can achieve a rated voltage of 80 V at an upper limit of the operating temperature range of 135°C.

TAIYO YUDEN focuses on the development of products that meet market needs, and will continue to expand its hybrid capacitor lineup.

■ Application

These hybrid capacitors are intended for noise suppression and power smoothing in power supply circuits for control functions such as automotive power steering or safety functions such as ADAS.

■ Characteristics

Part Number

Size

(φDxL) [mm]

Operating Temp. Range [℃]

Rated Volt. [Vdc]

Rated Capacitance

[μF]

Cap.

Tole. [%]

ESR

(max.)

[mΩ]

Rated Ripple (125℃)

(max.)

[mArms]

Rated Ripple (135℃)

(max.)

[mArms]

Endurance

(125℃

/135℃)

[hr]

RAHVX151M1TDE7002K

Φ6.3×7.7

-55~

+135

25

150

±20

25

2200

1400

4000

RAHVX331M1TEH0002K

Φ8×10

25

330

19

3900

2900

4000

RAHVX681M1TFH0002KX

Φ10×10

25

680

15

4600

3400

4000

RAHVX821M1TFK5002KX

Φ10×12.5

25

820

15

4800

3500

4000

RAHVX122M1TGL5005K

Φ12.5×13.5

25

1200

12

5700

4000

4000

RAHVX101M1GDE7002K

Φ6.3×7.7

35

100

30

2200

1400

4000

RAHVX221M1GEH0002K

Φ8×10

35

220

19

3800

2700

4000

RAHVX391M1GFH0002KX

Φ10×10

35

390

15

4600

3200

4000

RAHVX561M1GFK5002KX

Φ10×12.5

35

560

15

4800

3500

4000

RAHVX821M1GGL5005K

Φ12.5×13.5

35

820

13

5700

4000

4000

RAHVX220M4EDE7002K

Φ6.3×7.7

63

22

45

1800

900

4000

RAHVX560M4EEH0002K

Φ8×10

63

56

23

3300

2200

4000

RAHVX101M4EFH0002KX

Φ10×10

63

100

18

4000

3000

4000

RAHVX181M4EGL5005K

Φ12.5×13.5

63

180

16

5000

3100

4000

RAHVX330M1REH0002K

Φ8×10

80

33

25

3000

1900

4000

RAHVX680M1RFH0002KX

Φ10×10

80

68

23

3500

2500

4000

RAHVX820M1RFK5002KX

Φ10×12.5

80

82

23

3900

2600

4000

RAHVX121M1RGL5005K

Φ12.5×13.5

80

120

20

4700

2500

4000

RAHTX151M1TDE7002K

Φ6.3×7.7

25

150

25

2200

1400

4000

RAHTX331M1TEH0002K

Φ8×10

25

330

19

3900

2900

4000

RAHTX681M1TFH0002KX

Φ10×10

25

680

15

4600

3400

4000

RAHTX821M1TFK5002KX

Φ10×12.5

25

820

15

4800

3500

4000

RAHTX122M1TFP5002KX

Φ10×16.5

25

1200

12

5700

4000

4000

RAHTX122M1TGL5005K

Φ12.5×13.5

25

1200

12

5700

4000

4000

RAHTX182M1TGP5005K

Φ12.5×16.5

25

1800

11

6500

4800

4000

RAHTX101M1GDE7002K

Φ6.3×7.7

35

100

30

2200

1400

4000

RAHTX221M1GEH0002K

Φ8×10

35

220

19

3800

2700

4000

RAHTX391M1GFH0002KX

Φ10×10

35

390

15

4600

3200

4000

RAHTX561M1GFK5002KX

Φ10×12.5

35

560

15

4800

3500

4000

RAHTX821M1GFP5002KX

Φ10×16.5

35

820

13

5700

4000

4000

RAHTX821M1GGL5005K

Φ12.5×13.5

35

820

13

5700

4000

4000

RAHTX122M1GGP5005K

Φ12.5×16.5

35

1200

11

6500

4800

4000

RAHTX220M4EDE7002K

Φ6.3×7.7

63

22

45

1800

900

4000

RAHTX560M4EEH0002K

Φ8×10

63

56

23

3300

2200

4000

RAHTX101M4EFH0002KX

Φ10×10

63

100

18

4000

3000

4000

RAHTX181M4EFP5002KX

Φ10×16.5

63

180

15

5200

3600

4000

RAHTX221M4EFP5002KX

Φ10×16.5

63

220

15

5200

3600

4000

RAHTX181M4EGL5005K

Φ12.5×13.5

63

180

16

5000

3100

4000

RAHTX271M4EGP5005K

Φ12.5×16.5

63

270

13

6000

4400

4000

RAHTX331M4EGP5005K

Φ12.5×16.5

63

330

13

6000

4400

4000

RAHTX330M1REH0002K

Φ8×10

80

33

25

3000

1900

4000

RAHTX680M1RFH0002KX

Φ10×10

80

68

23

3500

2500

4000

RAHTX820M1RFK5002KX

Φ10×12.5

80

82

23

3900

2600

4000

RAHTX121M1RFP5002KX

Φ10×16.5

80

120

18

4700

3100

4000

RAHTX121M1RGL5005K

Φ12.5×13.5

80

120

20

4700

2500

4000

RAHTX181M1RGP5005K

Φ12.5×16.5

80

180

16

5500

3900

4000

For the detailed product lineup, refer to TAIYO YUDEN’s Web site:
https://ds.yuden.co.jp/TYCOMPAS/ut/specificationSearcher?SR2=MP&pg=1&pn=RAH*X*K&cid=AE&u=M

* The names of series noted in the text are excerpted from part numbers that indicate the types and characteristics of the products, and therefore are neither product names nor trademarks.

Note: Products are tested based on the test conditions and methods defined in AEC-Q200. Please consult with TAIYO YUDEN for details of the product specifications and AEC-Q200 test results, etc., and please review and approve TAIYO YUDEN’s product specifications before ordering.

TAIYO YUDEN CO., LTD. Product Inquiries: https://www.yuden.co.jp/en/contact/

View original content to download multimedia:https://www.prnewswire.com/news-releases/taiyo-yuden-commercializes-the-hvx–k-and-htx–k-series-of-conductive-polymer-hybrid-aluminum-electrolytic-capacitors-capable-of-handling-large-currents-and-high-voltages-302816346.html

SOURCE TAIYO YUDEN (U.S.A.) INC.

Continue Reading

Technology

Faith: The Spark Born by the Yudu Riverside

Published

on

By

BEIJING, Oct. 18, 2026 /PRNewswire/ — An interview from China.org.cn with Wang Xiaohui and David Ferguson on the Long March:

David Ferguson:

This is the Yudu River. One dusk in October, 1934, more than 86,000 soldiers of the Red Army crossed this river and embarked on the Long March, a two-year saga that has left its mark in history.

Yet, lingering here by the river, I am struck by a simple question: If you have faith in a bright future, and reality seems to thwart you at every turn, where do you find the moral strength to keep believing?

Wang Xiaohui:

At dusk on Oct. 17, 1934, an army of more than 86,000 troops gathered along the banks of the Yudu River. Over 800 boats of all sizes floated on the water, bound together with planks collected from villagers’ home gates, timber beams, and even coffin boards reserved for elderly locals. The people of Yudu built this pontoon bridge, determined to help the army led by the Communist Party of China (CPC) cross the river.

At that time, no one knew that the great expedition embarked upon by the banks of the Yudu River would go on to transform China and exert far-reaching influence across the world.

China in the 1920s and 1930s was plagued by chaos and despair.

The Kuomintang (KMT), the ruling party back then, was not capable of unifying the nation, leaving warlords locked in endless fighting. In 1931, Japanese invaders launched an assault on northeastern China, beginning their invasion. Crushed under domestic turbulence and foreign aggression, countless civilians were displaced, with many even starving to death on the streets; in certain regions, severe drought resulted in zero harvests, yet the farmers were forced to pay land taxes assessed for more than a decade into the future.

Amid this turmoil, the only glimmer of hope for the Chinese nation was kindled by the revolution ignited by the Communist Party of China.

The CPC, dedicated to winning liberation for the people and national independence, built contingents of workers’ and peasants’ Red Army troops and revolutionary base areas across the countryside. Impoverished farmers were granted land ownership, as well as unprecedented political dignity. On Nov. 7, 1931, the Chinese Soviet Republic was officially proclaimed in Ruijin, then a small village in southeastern China’s Jiangxi Province, establishing a Soviet system under which workers, peasants and soldiers elected representatives to run regional affairs and make policies.

The communist ideal of a fair society free from exploitation and equality for all blazed like a spark in the darkness; it kindled hopes among impoverished Chinese and became the wellspring of faith that enabled the Red Army — a force made up of poor workers and peasants — to overcome all hardships in the days to come.

Yet, bright as the spark was, it burned thin and fragile at times. Could this flame still endure when the ideals it carried were repeatedly battered by harsh reality?

In September 1933, flocks of warplanes clouded the skies over the Red Army’s revolutionary base areas. By then, Japanese invaders were steadily advancing towards North China, but Chiang Kai-shek’s KMT turned a blind eye to the looming national crisis. They mobilized over a million troops and more than 200 aircraft to launch a massive offensive at the Red Army’s base areas. Over the previous three years, Chiang Kai-shek had mounted four major military “encirclement” campaigns aimed at exterminating the Red Army, but all ended in failure. He was desperate for a pivotal victory to restore his prestige and to wipe out the CPC and the Red Army.

At the time, the commander of the Red Army abandoned mobile warfare tactics pioneered by Mao Zedong and other commanders, opting instead for rigid positional warfare involving conventional head-on clashes. But the reality was, some Red Army units didn’t even possess a single light machine gun; how could they confront the heavily-armed KMT army head-on?

Zhong Ming, a Red Army medic, could never erase the memories of gravely wounded soldiers being carried to his aid station. He remembered how a soldier whose chest was blown open begged his comrades to end his life. At the frontline, a whole battalion of Red Army soldiers religiously followed orders to defend crude earth-and-wood bunkers, but under the constant barrage of KMT artillery and airstrikes, every soldier in the battalion laid down their lives; not a single man survived.

What’s more heart-wrenching is that no matter how fearlessly the Red Army fought, the steep imbalance in military strength, paired with erroneous military command led to irreversible losses. By October 1934, the KMT’s iron-clad encirclement closed menacingly around Ruijin.

Faced with this dead-end, what decision would you make?

This stood as the most agonizing decision for the Red Army. The biggest challenge lay not in sacrificing one’s life for an ideal, but in finding a way to keep the revolutionary cause alive.

To stay meant defeat — the Red Army had no room to maneuver within the Central Revolutionary Base Area. To break through the encirclement, however slim the odds, offered a fighting chance. Preserving the Red Army as a living force mattered much more than clinging to isolated strongholds. Where the spark survives, the path ahead remains lit.

The air already turned chilly in October. Units of the Central Red Army assembled in Yudu to prepare for a strategic shift. The plan was kept strictly classified; none of the soldiers knew they were evacuating the base areas, only sensing an unusual vibe.

At dusk on Oct. 17, crowds lined up at the Yudu riverbank. Tens of thousands of villagers flocked from every corner to see the Red Army off. They walked alongside the marching columns, slipping food like eggs and glutinous rice balls into the soldiers’ pockets, praying for their swift homecoming.

The main force of the Central Red Army set off. Within days, they left behind revolutionary base areas where they had survived, grown and taken root. No one anticipated that the journey they embarked on would become the Long March, a trek spanning over 10 provinces. Still less could anyone imagine that this journey would ultimately pave the way for a brand-new China.

Looking back on this chapter of history, many claim that the Red Army only set out on this expedition because the enemies left them no other choice. To a degree, yes, the Long March was indeed a forced strategic shift, yet this fact does nothing to diminish its greatness and glory.

The ordinary Red Army soldiers had no idea how far they would march, or where they were heading. But they clung firmly to their founding mission: to deliver liberation for the people and independence to the nation. This unswerving conviction kept them from disintegrating through countless perils, sustaining them as they marched into the unknown with resolve.

David Ferguson:

I now realize that faith and ideals untested by harsh reality may have no true substance.

Since its founding, the Communist Party of China has always upheld the realization of communism as its fundamental goal. Despite devastating losses and extreme adversity, the Red Army continued to press forward resolutely and never faltered. Its inner strength came from an unshakable belief in the cause, an unwavering commitment to the founding aspiration, and a profound sense of mission. The Red Army was never fleeing pursuers in search of safety; it was marching forward to a future in which it had a steadfast belief.

Wang Xiaohui:

The Long March went on for two years. The Red Army trekked 25,000 li across some of China’s harshest terrain, but they kept their heads high, seeking hope amid despair and marching towards light through unending darkness. The lofty ideals and sense of mission they upheld have also become the torch that guides generations of CPC members in the following centennial, tempering them into steel as they press forward unswervingly toward national rejuvenation.

That spark lit along the Yudu River has never dimmed since.

China Mosaic
http://www.china.org.cn/video/node_7230027.htm

Faith: The Spark Born by the Yudu Riverside
http://www.china.org.cn/2026-10/16/content_118736835.shtml

View original content to download multimedia:https://www.prnewswire.com/news-releases/faith-the-spark-born-by-the-yudu-riverside-302911977.html

SOURCE China.org.cn

Continue Reading

Technology

Linktel Technologies Highlights Breakthrough 1.6T LPO Performance & Strong Market Pull at OCP 2026

Published

on

By

SAN JOSE, Calif., Oct. 18, 2026 /PRNewswire/ — At the recent 2026 OCP Global Summit, Linktel Technologies showcased its cutting-edge optical interconnect portfolios engineered specifically for next-generation AI computing networks. Among the heavy lineup, Linktel’s 1.6T Linear Pluggable Optics (LPO) solutions commanded immense industry attention, drawing heavy customer interest for their unprecedented energy efficiency, ultra-low latency, and supply-chain resilience.

Spotlight: 1.6T LPO Performance & High Customer Traction

AI data centers face immense scaling pressures, demanding higher bandwidth densities with tighter thermal and power budgets. Linktel’s 1.6T LPO solutions—highlighted by the 1.6T LPO 2DR4—delivered standout performance metrics that captured the spotlight at the summit:

Ultra-Low Power Consumption: Operates with power consumption as low as an impressive 10W, drastically mitigating data center cooling and power loads.Minimal Latency: Features a linear optics architecture that cuts down signal processing delays, making it a critical asset for high-performance AI scale-out fabrics.Enhanced Supply-Chain Resilience: Eliminating the optical DSP mitigates component choke points, ensuring robust scalability for mass deployments.Proven Interoperability: Following its breakthrough performance and multi-switch platform interoperability at the early September 2026 1.6T LPO-MSA Plugfest, Linktel has laid a solid foundation for the 200G-per-wavelength ecosystem.

Surging Market Interest

Throughout OCP 2026, Linktel’s live demonstrations of its 1.6T LPO, LRO, and FRO modules drew crowds of data center architects and industry partners. With volume production already in place, Linktel is fully equipped to meet the exploding market demand for energy-efficient, high-density 1.6T connectivity.

Overview of Other Innovations at OCP 2026

In addition to the heavily requested 1.6T LPO lineup, Linktel showcased two other major high-speed architectural pillars:

12.8T Liquid-Cooled XPO:Featured a live thermal demonstration integrating advanced liquid cooling to guarantee stable operations in high-density AI nodes.As a founding member of the XPO MSA, Linktel is actively scaling XPO series with FRO, LRO, and LPO variants for comprehensive scale-up, scale-out, and scale-across frameworks.6.4T/7.2T NPO Modules:Displayed with covers removed to reveal internal architectural designs supporting both ELS and ILS configurations.Combines compact high density with low power and low latency, backed by an established 6.4T/7.2T NPO roadmap.DMD Technology & Executive Presentation:Linktel Engineer Director Dr. Grace Zhang hosted a heavily attended Executive Session titled “Dispersion Managed Transceiver for Next-Gen AI Fabrics,” detailing cost-effective 800G (20km) and 1.6T (10km) solutions for OCS SuperPOD architectures, as well as the feasibility of 400G per lambda (3km).With its DMD product line already in volume production, Linktel actively calls upon ecosystem partners to join forces in collaborative development. To drive ecosystem maturity, Linktel is open to sharing its U.S.-filed patents, paving the way for industry-wide adoption and advancements in next-gen AI fabrics.

About Linktel Technologies

Linktel Technologies is a global leader in optical transceiver development and manufacturing, supplying high-speed optical I/O connectivity—including pluggable transceivers, optical engines, and ODM/JDM services.

For more information, visit www.linktel.com or follow Linktel Technologies on LinkedIn.

View original content:https://www.prnewswire.com/news-releases/linktel-technologies-highlights-breakthrough-1-6t-lpo-performance–strong-market-pull-at-ocp-2026–302911973.html

SOURCE Linktel Technologies

Continue Reading

Technology

Advanced Manufacturing in Focus: Smart Life and Robotics Take the Spotlight at 140th Canton Fair

Published

on

By

GUANGZHOU, China, Oct. 18, 2026 /CNW/ — Phase 1 of the 140th Canton Fair, themed “Advanced Manufacturing,” opened on October 15 and will run through October 19. As one of the event’s most closely watched sections, the Consumer Electronics and Information Products zone once again serves as a showcase for the latest achievements in China’s manufacturing and technology industries.

Smart Life Solutions Address an Aging and Globalized Market

A highlight of this section is the focus on smart living, which brings together smart solutions designed to support healthier, safer, and more independent lifestyles.

For example, wearable devices and continuous glucose monitoring systems enable convenient tracking of key health indicators such as heart rate and blood glucose levels. Meanwhile, wearable exoskeletons and other AI-powered devices support mobility training and functional recovery. For home and elderly care, companion robots, electric nursing beds and home-use hyperbaric oxygen chambers, offer a combination of daily care, wellness support and lifestyle assistance. All these solutions highlight a growing shift toward technology-enabled living, where health management, personal care, and independent living are becoming more accessible and connected.

Service Robots Demonstrate Expanding Real-World Applications

The Service Robot Zone remains one of the fair’s most popular attractions in this edition.

Among the crowd favorites is a humanoid robot standing roughly 70–80 centimeters tall. With its expressive movements and playful appearance, the robot draws constant attention as it dances, approaches visitors and occasionally performs flips to the delight of onlookers. Behind the product is a company that has overcome key challenges in compact joint modules and modular humanoid robot development. Its independently developed high-power-density joints deliver remarkable agility and explosive movement, while modular architecture provides flexibility for a wide range of future applications.

More broadly, the Service Robot Zone features exhibits spanning a wide range of application areas, including embodied intelligence, specialized operations, urban services, and smart living. Full-size humanoid robots, dexterous hands with multimodal sensing capabilities and wheeled robots highlight the latest advances in artificial intelligence, perception technologies and motion control. For demanding industrial and emergency environments, exhibitors are presenting robotic inspection systems, live-line maintenance robots and underwater propulsion robots designed to improve safety and operational efficiency.

The commercial services sector is also well represented through reception robots, façade-cleaning robots and fully automated coffee kiosks, while everyday life applications include wearable exoskeletons, robotic lawn mowers and educational robots for home use. Together, these exhibits demonstrate how China’s robotics industry is accelerating its transition from technological innovation to large-scale commercialization.

As the 140th Canton Fair gets underway, the showcased innovations highlight China’s growing strength in advanced manufacturing, turning cutting-edge technologies into practical, market-ready solutions for global customers.

For more convenient attendance, please click here for pre-registration:
https://buyer.cantonfair.org.cn/register/buyer/email?source_type=16

View original content to download multimedia:https://www.prnewswire.com/news-releases/advanced-manufacturing-in-focus-smart-life-and-robotics-take-the-spotlight-at-140th-canton-fair-302911955.html

SOURCE Canton Fair

Continue Reading

Trending