Connect with us

Technology

CPSC Modernizes Decades-Old Injury Surveillance System to Protect More Americans, Faster

Published

on

NEISS-R will expand nationwide coverage, accelerate hazard detection, and strengthen privacy protections

WASHINGTON, July 22, 2026 /PRNewswire/ — The U.S. Consumer Product Safety Commission (CPSC) today announced a significant modernization of the National Electronic Injury Surveillance System (NEISS), the nation’s principal system for tracking consumer product-related injuries. This effort is expected to become fully effective by the beginning of 2027. 

For more than five decades, NEISS served as an important source of consumer product injury data. Designed in 1972 for a paper-record era, the system relied on labor-intensive manual review and coding of medical records from roughly 70 of the nation’s more than 5,000 hospital emergency departments, leaving 14 states without participating hospitals. Those limitations restricted the system’s geographic reach, slowed analysis, and reduced the Commission’s ability to identify rare and rapidly emerging product hazards.  

The modernized system—NEISS-Remodel, or NEISS-R— is being implemented to replace that outdated model with secure, standardized electronic data exchange, broader geographic representation, and significantly faster injury surveillance. 

Nationwide coverage for the first time. NEISS-R will expand the surveillance network across all 50 states, adding hospitals in Alaska, Hawaii, the Mountain West, and northern states that were previously underrepresented or not represented at all. This more geographically balanced sample will strengthen the Commission’s ability to detect product hazards unique to particular regions and improve the statistical reliability of the nation’s injury data. 

Faster hazard detection, more lives saved. By leveraging modern technology and the country’s existing electronic health records infrastructure, NEISS-R will enable CPSC to spot rare and rapidly emerging hazards far sooner than the legacy system allowed. Earlier detection will mean earlier warnings, recalls, and protective action—reducing product-related injuries before they multiply. 

Privacy and security by design. NEISS-R will exchange data through a federally designated Qualified Health Information Network, supported by contractual privacy requirements and standardized security safeguards. The system is built on privacy-by-design principles: it will limit collection and retention to the minimum data necessary for CPSC’s statutory mission, support de-identification before information reaches CPSC, and reduce manual handling of sensitive records. CPSC has also transitioned from an on-premises environment to a modern, cloud-based architecture built on standardized federal security controls—creating a more secure and privacy-centered foundation for injury surveillance. 

A better system for consumers and taxpayers. NEISS-R will modernize a system designed for the last century, making it more timely, more accurate, and more cost-effective. The result will be stronger consumer product oversight and a smarter use of public resources in service of CPSC’s core mission: keeping American families safe.

About CPSC
CPSC is the federal agency charged with protecting the public from unreasonable risks of injury associated with thousands of types of consumer products. Deaths, injuries, and property damage from consumer product-related incidents cost the nation more than $1 trillion annually. Since the agency was established more than 50 years ago, CPSC has worked to ensure the safety of consumer products, contributing to a decline in related injuries.

Federal law prohibits any person from selling products subject to a Commission-ordered recall or to a voluntary recall undertaken in consultation with CPSC.

For lifesaving information:
– Visit CPSC.gov.
– Sign up to receive our e-mail alerts.
– Follow us on Facebook, Instagram, X, BlueSky, Threads, LinkedIn and Truth Social.
– Report a dangerous product or a product-related injury on www.SaferProducts.gov.
– Call CPSC’s Hotline at 800-638-2772 (TTY 800-638-8270).
– Contact a media specialist.

 

View original content to download multimedia:https://www.prnewswire.com/news-releases/cpsc-modernizes-decades-old-injury-surveillance-system-to-protect-more-americans-faster-302832430.html

SOURCE U.S. Consumer Product Safety Commission

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Technology

SSC SECURITY SERVICES CORP. ANNOUNCES SHAREHOLDER APPROVAL OF PREVIOUSLY ANNOUNCED PLAN OF ARRANGEMENT

Published

on

By

REGINA, SK, July 22, 2026 /CNW/ — SSC Security Services Corp. (TSXV: SECU) (US: SECUF) (“SSC” or the “Company”) today announced the voting results from its special meeting of holders (the “Shareholders”) of common shares (the “Shares”) of the Company held today (the “Meeting”) in connection with the previously announced plan of arrangement under the Business Corporations Act, 2021 (Saskatchewan) (the “Arrangement”), pursuant to which Universal Protection Service, LP (the “Parent”), through its wholly-owned subsidiary, 102236724 Saskatchewan Ltd. (the “Purchaser”, and together with the Parent, “Allied Universal”), will acquire all of the issued and outstanding Shares for $4.4075 per Share in cash, and pursuant to which certain officers and directors of the Company (the “Management Purchasers”) will purchase the Company’s legacy assets and cyber security business in a management buy-out transaction (the “MBO” and collectively with the Arrangement, the “Transaction”).

The Arrangement requires (i) the approval of 66 2/3% of the votes cast by Shareholders (including the Management Purchasers) present or represented by proxy and entitled to vote at the Meeting and (ii) the approval of a simple majority (more than 50%) of the votes cast by Shareholders present or represented by proxy and entitled to vote at the Meeting, other than the Management Purchasers and any other person required to be excluded from such vote for the purpose of Multilateral Instrument 61-101 – Protection of Minority Security Holders in Special Transactions (the “Minority Shareholders”). At the Meeting, the resolution approving the Arrangement was approved by (i) 99.99% of the votes cast by Shareholders, and (ii) 99.97% of the votes cast by the Minority Shareholders.

Remaining Conditions to Completion of the Arrangement

Completion of the Transaction remains subject to the satisfaction or waiver of certain closing conditions that are set out in the arrangement agreement entered into between the Company and Allied Universal on May 26, 2026 (the “Arrangement Agreement”), including receipt of final court approval and approval of the TSX Venture Exchange. SSC intends to seek a final order (the “Final Order”) of the Court of King’s Bench for Saskatchewan to approve the Arrangement at a hearing to be held on July 27, 2026.

Subject to obtaining the Final Order and the satisfaction or waiver of the remaining conditions in the Arrangement Agreement, the Transaction is anticipated to close on July 31, 2026.

About SSC

SSC Security Services Corp. is Canada’s largest publicly traded security company. SSC acts as a public holding company investing in physical, electronic and cyber security businesses. The Company has one wholly-owned operating subsidiary: Logixx Security Inc., which provides physical, electronic and cyber security services to primarily commercial, industrial and public sector clients. The Company’s clients include federal and provincial governments, Crown corporations, and many high-profile corporate and public sector clients such as hospitals, airports, utility companies and police forces.

Forward Looking Statements

This release includes forward-looking statements concerning the future results, future performance, intentions, objectives, plans and expectations of the Company. Often, but not always, forward-looking statements can be identified by the use of words such as “plans”, “expects”, “is expected”, “estimates”, “intends”, “anticipates”, “believes” or variations of such words and phrases (including negative and grammatical variations) or state that certain actions, events or results “may”, “could”, “would”, “might” or “will” be taken, occur or be achieved. The forward-looking events and circumstances discussed in this release may not occur and could differ materially as a result of known and unknown risks, uncertainties affecting SSC, including risks regarding economic factors and the equity markets generally and many other factors beyond the control of SSC. Without limiting the generality of the foregoing, this release contains forward-looking statements pertaining to: the anticipated timing of the Transaction; receipt of required court and stock exchange approvals; satisfaction of closing conditions; and the anticipated effective date of the Arrangement. Risks and uncertainties that could cause actual results to differ materially include: failure to obtain court or stock exchange approvals; failure to satisfy closing conditions; failure of the parties to complete the Transaction for any reason, including termination of the Arrangement Agreement; legal challenges to the Arrangement; and risks and uncertainties discussed in SSC’s disclosure documents filed on SEDAR+ at www.sedarplus.ca. Forward-looking statements are not guarantees of future performance. These forward-looking statements should not be relied upon as representing the views of SSC as of any date after the date of this Release. Although SSC has attempted to identify important factors that could cause actual actions, events or results to differ materially from those described in forward-looking statements, there can be no assurance that forward-looking statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements. The forward-looking statements contained in this Release are expressly qualified in their entirety by this cautionary statement. The forward-looking statements included in this Release are made as of the date of this Release and SSC does not undertake to publicly update such forward-looking statements to reflect new information, subsequent events or otherwise, except as required by applicable securities laws.

Neither TSX Venture Exchange nor its Regulation Services Provider accepts responsibility for the adequacy or accuracy of this release.

SOURCE SSC Security Services Corp.

Continue Reading

Technology

GMI Cloud Announces Strategic Compute Collaboration With NVIDIA

Published

on

By

The collaboration advances GMI Cloud’s selective partnership strategy and supports its next phase of AI infrastructure growth

MOUNTAIN VIEW, Calif., July 22, 2026 /PRNewswire/ — GMI Cloud, a leading AI-native cloud provider delivering high-performance GPU infrastructure and inference services, today announced a strategic collaboration with NVIDIA as part of its selective approach to building long-term compute partnerships.

In support of this strategy, GMI Cloud has committed $500 million in CapEx to expand its compute capabilities and serve growing customer demand. The commitment represents a significant investment in the company’s next phase of infrastructure development.

GMI Cloud has also secured nine-figure contracts with a leading U.S. frontier AI enterprise, providing a strong commercial foundation for its continued growth.

GMI Cloud is pursuing a selective partnership model centered on a limited number of strategic relationships. The collaboration builds on GMI Cloud’s continued partnership with NVIDIA and brings together long-term compute planning with contracted customer demand.

GMI Cloud is among the earliest cloud providers to adopt this new compute partnership model, marking an important step in the company’s expansion and partnership strategy.

The $500 million CapEx commitment, nine-figure customer contracts, and selective partnership strategy establish the foundation for GMI Cloud’s next stage of growth. The company is set to continue this trajectory as it expands its compute capabilities and supports the evolving needs of frontier AI customers. For more information, visit www.gmicloud.ai.

About GMI Cloud
GMI Cloud is an AI-native cloud infrastructure company powering the next generation of AI applications. The company provides high-performance GPU infrastructure, Model-as-a-Service, dedicated endpoints, and AI workload deployment solutions for developers and enterprises building production AI systems. GMI Cloud helps teams move from experimentation to production with scalable compute, flexible infrastructure, and an ecosystem built for modern AI builders. For more information visit gmicloud.ai.

View original content to download multimedia:https://www.prnewswire.com/news-releases/gmi-cloud-announces-strategic-compute-collaboration-with-nvidia-302832476.html

SOURCE GMI Cloud

Continue Reading

Technology

ROKFORM Launches Rugged Case for Samsung Galaxy Z Fold8 and Z Fold8 Ultra

Published

on

By

Complete foldable protection with six-foot drop rating, MAGMAX ™ magnetic grip, and RokLock ® twist-lock mounting

IRVINE, Calif., July 22, 2026 /PRNewswire/ — ROKFORM today launched its Rugged Case for the Samsung Galaxy Z Fold8 and Galaxy Z Fold8 Ultra. Built with a slim, two-piece shell design — not just a backplate — the Rugged Case delivers six-foot drop protection, full hinge coverage, and secure RokLock® mounting across both foldable models.

“Users get the full ROKFORM experience with the Rugged Case, including incredible drop protection, RokLock® mounting, and MAGMAX™ magnetic strength, all in a design built specifically around the unique needs of a foldable device,” said Jeff Whitten, ROKFORM CEO.

The two-piece shell locks together to protect the outer screen, back, and spine of the Galaxy Z Fold8. In addition, the case is engineered to guard one of the most critical and vulnerable components on foldable phones — the hinge — from drops and impacts with full hinge coverage. The case exceeds military-grade drop protection standards from six feet, with a dual-layer build and reinforced corners designed to absorb real-world impact.

ROKFORM’s patented RokLock® twist-lock system delivers rock-solid, wobble-free connection to ROKFORM’s full ecosystem of car, bike, and motorcycle mounts. Combined with MAGMAX™ magnets, which deliver 3x more holding strength over standard MagSafe® magnets, users get an ultra-secure magnetic grip for mounting and use with other accessories.

The case is compatible with ROKFORM wireless chargers and compatible wireless charging accessories.

The Rugged Case for the Samsung Galaxy Z Fold8 and Z Fold8 Ultra retails for $79.99 and will be available August 5, 2026 at rokform.com.

About ROKFORM:
Founded in 2010, ROKFORM’s small but dedicated team has bootstrapped its way to becoming a leader in the design and manufacturing of innovative consumer electronics products. It is based in Irvine, California. With nearly 20 patents, ROKFORM remains a leader in the premium active lifestyle consumer electronics niche, with innovative designs to protect and enhance the world’s mobile devices. Products are designed and shipped directly from California headquarters, and customers can visit ROKFORM’s showroom to experience them. Learn more at rokform.com.

Contact:
Haley Lush
775-204-7975
419258@email4pr.com

View original content to download multimedia:https://www.prnewswire.com/news-releases/rokform-launches-rugged-case-for-samsung-galaxy-z-fold8-and-z-fold8-ultra-302832493.html

SOURCE ROKFORM

Continue Reading

Trending