Connect with us

Technology

ChipMOS REPORTS SECOND QUARTER 2026 RESULTS; RECORD HIGH QUARTERLY REVENUE SINCE 2014

Published

on

28.7% Increase in 2Q26 Revenue Compared to 2Q25Gross Margin Expands to 18%2Q26 Net Earnings of NT$1.28 or US$0.04 per Basic Common Share Compared to a 2Q25 Net Loss of NT$0.75 or US$0.02 per Basic Common Share2Q26 Net Earnings of US$0.80 per Basic ADS Compared to a 2Q25 Net Loss of US$0.47 per Basic ADSCash and Cash Equivalents Balance of NT$12,552.3 Million or US$394.1 MillionCash Dividend Distributed from Capital Surplus of NT$1.23 per Common Share on July 17, 2026 and US$0.760 per ADS on July 24, 2026

HSINCHU, Aug. 11, 2026 /PRNewswire-FirstCall/ — ChipMOS TECHNOLOGIES INC. (“ChipMOS” or the “Company”) (Taiwan Stock Exchange: 8150 and Nasdaq: IMOS), an industry leading provider of outsourced semiconductor assembly and test services (“OSAT”), today reported consolidated financial results for the second quarter ended June 30, 2026. All U.S. dollar figures cited in this press release are based on the exchange rate of NT$31.85 against US$1.00 as of June 30, 2026.

All the figures were prepared in accordance with Taiwan-International Financial Reporting Standards (“Taiwan-IFRS”).

Revenue for the second quarter of 2026 was NT$7,383.1 million or US$231.8 million, an increase of 6.5% from NT$6,935.6 million or US$217.8 million in the first quarter of 2026 and an increase of 28.7% from NT$5,735.8 million or US$180.1 million for the same period in 2025. Gross margin for the second quarter of 2026 was 18% compared to 13.8% in the first quarter of 2026, and 6.6% in the same period in 2025.

Net non-operating income in the second quarter of 2026 was NT$78.9 million or US$2.5 million, compared to NT$78.5 million or US$2.5 million in the first quarter of 2026, and net non-operating expenses of NT$682.2 million or US$21.4 million in the second quarter of 2025. The difference between the second quarter of 2025 is mainly due to the decrease of foreign exchange loss of NT$685 million or US$21.5 million and the positive impact on valuation of financial assets at fair value through profit or loss of NT$80 million or US$2.5 million from the loss on valuation of financial assets at fair value through profit or loss of NT$2 million or US$0.1 million in the second quarter of 2025 to the gain on valuation of financial assets at fair value through profit or loss of NT$78 million or US$2.4 million in the second quarter of 2026.

Net profit attributable to equity holders of the Company for the second quarter of 2026 was NT$891.7 million or US$28.0 million, and NT$1.28 or US$0.04 per basic common share, as compared to NT$504.9 million or US$15.9 million, and NT$0.72 or US$0.02 per basic common share in the first quarter of 2026. This compares to net loss attributable to equity holders of the Company for the second quarter of 2025 was NT$533.1 million or US$16.7 million, and NT$0.75 or US$0.02 per basic common share. Net earnings for the second quarter of 2026 were US$0.80 per basic ADS, compared to US$0.45 per basic ADS for the first quarter of 2026 and net losses of US$0.47 per basic ADS in the second quarter of 2025.

Net free cash inflow for the first half of 2026 was NT$735.9 million or US$23.1 million with a strong balance of cash and cash equivalents was NT$12,552.3 million or US$394.1 million.

Second Quarter 2026 Investor Semiannual Conference Call / Webcast Details

Date: Tuesday, August 11, 2026
Time: 3:00PM Taiwan (3:00AM New York)
Dial-In: +886-2-33961191
Password: 1637011 #
Semiannual Conference Call Webcast and Replay: https://www.chipmos.com/chinese/ir/info2.aspx
Replay: Starts approximately 2 hours after the live call ends
Language: Mandarin

Note: A transcript will be provided on the Company’s website in English following the semiannual conference call to help ensure transparency, and to facilitate a better understanding of the Company’s financial results and operating environment.

About ChipMOS TECHNOLOGIES INC.:
ChipMOS TECHNOLOGIES INC. (“ChipMOS” or the “Company”) (Taiwan Stock Exchange: 8150 and Nasdaq: IMOS) (www.chipmos.com) is an industry leading provider of outsourced semiconductor assembly and test services. With advanced facilities in Hsinchu Science Park, Hsinchu Industrial Park and Southern Taiwan Science Park in Taiwan, ChipMOS is known for its track record of excellence and history of innovation. The Company provides end-to-end assembly and test services to leading fabless semiconductor companies, integrated device manufacturers and independent semiconductor foundries serving virtually all end markets worldwide.

Forward-Looking Statements 
This press release may contain certain forward-looking statements. These forward-looking statements may be identified by words such as ‘believes,’ ‘expects,’ ‘anticipates,’ ‘projects,’ ‘intends,’ ‘should,’ ‘seeks,’ ‘estimates,’ ‘future’ or similar expressions or by discussion of, among other things, strategies, goals, plans or intentions. These statements may include financial projections and estimates and their underlying assumptions, statements regarding current macroeconomic conditions, including the impacts of high inflation, foreign exchange rates and risk of recession, on demand for our products, consumer confidence and financial markets generally; changes in trade regulations, policies, and agreements and the imposition of tariffs that affect our products or operations, including potential new tariffs that may be imposed and our ability to mitigate with respect to future operations, products and services, and statements regarding future performance. Actual results may differ materially in the future from those reflected in forward-looking statements contained in this document, based on a number of important factors and risks, which are more specifically identified in the Company’s most recent U.S. Securities and Exchange Commission (the “SEC”) filings. Further information regarding these risks, uncertainties and other factors are included in the Company’s most recent Annual Report on Form 20-F filed with the SEC and in its other filings with the SEC.

Contacts:

In Taiwan

Jesse Huang

ChipMOS TECHNOLOGIES INC.

+886-6-5052388 ext. 7715

IR@chipmos.com 

In the U.S.

David Pasquale

Global IR Partners

+1-914-337-8801

dpasquale@globalirpartners.com 

View original content:https://www.prnewswire.com/news-releases/chipmos-reports-second-quarter-2026-results-record-high-quarterly-revenue-since-2014-302847951.html

SOURCE ChipMOS TECHNOLOGIES INC.

Continue Reading

Technology

Elsevier’s ClinicalKey AI combines world-leading content and patient-specific information to set a new standard in clinical decision support

Published

on

By

ClinicalKey AI offers integration of point-of-care AI, market-leading content and the patient’s medical record across different EHR platforms

NEW YORK, Nov. 16, 2026 /PRNewswire/ — Elsevier’s ClinicalKey AI, a trusted point-of-care tool used by clinicians throughout the U.S. can now access a patient’s entire medical record inside the Electronic Health Record (EHR) and evaluate treatment plans against the company’s evidence-based clinical content. Used in more than 1,200 hospital sites across the world, ClinicalKey AI not only integrates point-of-care AI with all EHR providers, it does so with the security health systems are looking for as they protect patient data and adopt responsible AI use. This follows Elsevier’s acquisition in June 2026 of Wellsheet, a U.S.-based health technology company that specializes in aggregating and synthesizing patient data from electronic health records (EHR) to surface relevant clinical intelligence at the point of care.

When providers use ClinicalKey AI, it starts with the patient, not a blank AI prompt. The solution provides clinical decision support that is highly personalized; directly in the clinicians’ workflows at the point of care. Every answer includes data from the patient’s chart and citations from trusted content – ClinicalKey AI draws answers from full text articles from approximately 1,000 world leading journals.

Elsevier is working with health systems across the U.S., including centers like the San Juan Regional Medical Center in New Mexico which serves communities with limited access to healthcare. With this new offering, ClinicalKey AI sets a new standard for evidence-based clinical decision making by bringing trusted clinical knowledge and relevant patient context together within the clinical workflow, providing critical support to health systems.

Dr. Carlo Hallak, Physician Executive at SJRMC, said: “We’re already seeing how ClinicalKey AI can be instrumental at the bedside and help improve care for our patients. As a rural healthcare center, we are proud to say that by using ClinicalKey AI to check each patient’s care against the same evidence base that major health systems rely on, we’re able to deliver the standard of care patients expect in any major city or leading academic center. ClinicalKey AI reads the whole chart, checks it against the evidence and shows exactly where each finding comes from. That support is invaluable for a hospital like ours, and we’re already seeing strong adoption of ClinicalKey AI among our clinicians.”

San Juan Regional Medical Center is utilizing ClinicalKey AI’s new patient context functionality to provide quality care with fewer resources. With smaller clinical and quality teams than large academic health systems, and in a state where nearly 40% of residents rely on Medicaid, the medical center has found this support especially valuable.

Omry Bigger, President of Clinical Solutions at Elsevier, said: “Health systems tell us two things stand in the way of adopting AI: tools that don’t work with their existing EHR partners, and concerns about security, compliance and responsible use. ClinicalKey AI was designed to address both. As an EHR supported and HIPAA compliant ready solution, ClinicalKey AI integrates seamlessly across health systems to provide clinicians with trusted evidence and patient context that gives them tailored clinical insights for each patient at the point of care.”

Find out more about ClinicalKey AI here or by visiting us at the HLTH Conference (Booth 3518) in Las Vegas from November 15-18.

About San Juan Regional Medical Center 

San Juan Regional Medical Center is a not-for-profit, community-governed acute care medical center located in Farmington, New Mexico. Committed to bettering the quality of life, health, and care of its community, SJRMC offers a broad range of inpatient, outpatient, and emergency services, along with primary and specialty care, to patients across the Four Corners region. For more information, visit www.sanjuanregional.com.

About Elsevier

Elsevier is a global leader in advanced information and decision support. For over a century, we have been helping advance science and healthcare to advance human progress. We support academic and corporate research communities, doctors, nurses, future healthcare professionals, and educators across 170 countries in their vital work. We help impact makers achieve better outcomes with research and clinical-grade solutions built on the world’s leading evidence-based scientific and medical content, precision AI, and expert human assessment. We champion inclusion and sustainability, working with the communities that we serve. The Elsevier Foundation supports research and health partnerships around the world.

Elsevier is part of RELX, a global provider of information-based analytics and decision tools for professional and business customers. For more information, visit www.elsevier.com and follow us on social media @elsevierconnect.

View original content to download multimedia:https://www.prnewswire.co.uk/news-releases/elseviers-clinicalkey-ai-combines-world-leading-content-and-patient-specific-information-to-set-a-new-standard-in-clinical-decision-support-302940260.html

Continue Reading

Technology

ADP to Present at Upcoming Investor Conference

Published

on

By

ROSELAND, N.J., Nov. 16, 2026 /PRNewswire/ — ADP (Nasdaq: ADP), a global leader in HR and payroll solutions, today announced that it will present at the Nasdaq Investor Conference in London on Tuesday, December 8, 2026 at 4:00 a.m. ET / 9:00 a.m. GMT. 

Links to the live webcast and an archived replay of the event will be available on ADP’s website at investors.adp.com.

About ADP (Nasdaq: ADP)
ADP has been shaping the world of work with innovation and expertise for more than 75 years. As a global leader in HR and payroll solutions, ADP continuously works to solve business challenges for our clients and their workers, from simple, easy-to-use tools for small businesses to fully integrated platforms for global enterprises – and everything in between. Always Designing for People means we’re focused on just that – people. We use our unmatched AI-driven insights and proven expertise to design innovative solutions that help people achieve greater success at work. More than 1.1 million clients across 140+ countries rely on ADP’s exceptional service to support their people and drive their business forward. HR, Talent, Time Management, Benefits, Compliance, and Payroll. Learn more at ADP.com

ADP, the ADP logo, and Always Designing for People are trademarks of ADP, Inc.

Copyright © 2026 ADP, Inc. All rights reserved.

ADP – Investor Relations

Investor Relations Contacts:
Matthew Keating, CFA
973.974.3037
Matthew.Keating@adp.com

ADP – Media

Media Contact:
Allyce Hackmann
201.400.4583
Allyce.Hackmann@adp.com

 

View original content to download multimedia:https://www.prnewswire.com/news-releases/adp-to-present-at-upcoming-investor-conference-302939068.html

SOURCE ADP – IR

Continue Reading

Technology

ZUERST Flextri F5 Gains Momentum in China with a Three-in-One Foldable Design for Phones, Tablets and Laptops

Published

on

By

SHENZHEN, China, Nov. 16, 2026 /PRNewswire/ — 3C digital accessory manufacturer ZUERST is bringing its Flextri F5 three-in-one foldable stand to greater international attention following its growing sales performance in China. Through a versatile folding structure, ZUERST Flextri F5 combines multiple device-support modes (phone stand mode, tablet stand mode and laptop stand mode) in one compact stand. It offers a more flexible device-support solution for work, study and everyday use.

Meeting the Needs of a Multi-Device Lifestyle

Nowadays, people’s needs regarding electronic devices and their usage environments are evolving. For users who rely on smartphones, tablets, and laptops to handle various tasks, carrying and setting up separate stands for each device can take up excessive desk space and prove inconvenient when on the go. Consequently, stands that accommodate multiple types of devices—offering both flexibility and portability—have become a practical solution for multi-device users.

ZUERST developed the Flextri F5 around this practical need. Its three-in-one design brings phone stand, tablet stand and laptop stand functions together in one foldable product. Rather than offering three separate accessories, the Flextri F5 uses a multi-joint folding structure to switch between different support configurations.

“We think good product design is about meeting everyday needs in smarter ways. With the Flextri F5, we have integrated three device-support modes into one well-designed folding structure, offering greater flexibility for people who use multiple electronic devices today.” said Huifeng Chen, the founder of ZUERST.

One Stand, Three Modes: The Design Behind Flextri F5

ZUERST Flextri F5 adapts to different devices and tasks through three use modes. In phone stand mode, it provides a stable platform for video calls, viewing content and hands-free operation, and offers two adjustable angles. In tablet stand mode, it is suitable for reading, note-taking, online learning and entertainment. Its laptop stand mode supports six adjustable angles (12° to 31°), allowing users to adjust the screen angle according to different usage habits, making it suitable for desk work, remote work and other productivity-focused settings.

The product’s core feature is its multi-joint folding structure, which allows users to switch the stand between three configurations. When opened, its double-triangle support structure provides stable support for the device; when folded, it measures 149 × 82 × 12 mm and weighs only 300 g. So it can be easily tucked into a pocket, backpack, or laptop bag, making it ideal for commuting, business travel and shared workspace.

In terms of materials, ZUERST Flextri F5 uses an aluminum alloy main structure with a maximum load capacity of 10 kg, maintaining a lightweight appearance while ensuring the structural strength required for daily use. High-strength anti-slip silicone pads cover all contact points on the product to help prevent slipping and protect device surfaces from scratches.

Flextri F5’s Market Growth Reflects ZUERST’s Design Approach

Since its launch in May 2026, ZUERST Flextri F5 has achieved growth in sales in China, with channels covering Chinese e-commerce platforms such as Tmall, Douyin, WeChat stores, RedNote, as well as the brand’s own channels.

As of October, ZUERST Flextri F5 had accumulated sales of 21,418 units on Chinese e-commerce platforms. October sales reached 9,368 units, representing an approximately 71.5% increase compared to September and more than seven times the sales volume in July. This performance reflects the product’s growing market acceptance in China and demonstrates the value of its three-in-one design in multi-device usage scenarios.

The Flextri F5 also reflects ZUERST’s broader design approach to electronic device accessories. “We firmly believe that true product innovation should not stop at changes in appearance. It should start from the product structure itself, rethinking its function, form, and usage.” Chen added. ZUERST emphasizes original product design, structural innovation, and practical applications, continuously exploring the application of support structures, mechanical connections, and folding mechanisms in electronic device accessories, striving to achieve a balance between product stability, space utilization, and portability. Currently, it holds 40 patents across different jurisdictions and various patent categories.

As a laptop and tablet stand manufacturer, ZUERST also develops accessories for various electronic devices, including wireless chargers, headphone stands, and office keyboards. Looking ahead, ZUERST will continue to explore how structural design can turn everyday accessories into more adaptable tools for modern work and life.

About ZUERST

Founded in 2017, ZUERST is a brand of Shenzhen Reno Information Technology Co., Ltd., which specializes in the R&D, production, and OEM/ODM manufacturing of 3C digital accessories, including laptop stands, phone stands, tablet stands, headphone stands and wireless chargers. The company holds the ISO 9001 quality management certification, and some of its products comply with applicable CE, RoHS and REACH requirements. Today, ZUERST serves clients in over 100 countries and regions worldwide.

Media Contact:

Reno Information Technology Co., Ltd.
Building 13, Zone B, Liantang Industrial Zone, Shangcun Community, Gongming Street, Guangming District, Shenzhen, Guangdong, China
Email: office@sz-zuerst.com
Tel: +86 13823636803
www.sz-zuerst.com 

View original content to download multimedia:https://www.prnewswire.com/news-releases/zuerst-flextri-f5-gains-momentum-in-china-with-a-three-in-one-foldable-design-for-phones-tablets-and-laptops-302940160.html

SOURCE Reno Information Technology Co., Ltd.

Continue Reading

Trending