Connect with us

Technology

In Grand Rapids, Injection Molding Expert Ryan Eggleston Breaks Down Part Design for HelloNation

Published

on

GRAND RAPIDS, Mich., Sept. 8, 2026 /PRNewswire/ — What are the most common mistakes in molded part design, and how can they be avoided? According to a HelloNation article, small details in design often determine whether plastic injection molding runs smoothly or encounters costly setbacks. Ryan Eggleston of UTP Solutions dbu-Medi-Tec Plastics in Grand Rapids explains how careful attention to ribs, draft angles, and wall thickness can prevent defects and improve production efficiency.

The article makes clear that molded part design is just as important as the molding process itself. Poor choices at the design stage can cause delays, raise costs, and reduce product quality. Eggleston emphasizes that avoiding common pitfalls allows manufacturers to produce stronger, more reliable parts at lower overall expense.

One of the most frequent issues is improper rib design. Ribs are used to reinforce parts without adding excess wall thickness. However, when ribs are too thick at the base, they create sink marks and warpage as different sections cool unevenly. The HelloNation article recommends that rib thickness stay at about half the adjoining wall. This proportion prevents surface defects while maintaining structural strength. Ryan Eggleston notes that proper rib design supports both durability and appearance.

Draft angles represent another critical factor. Without draft, molded parts often stick inside the tool, requiring extra force for removal. This slows down production, increases wear on molds, and risks part damage. Even a small draft angle helps parts release smoothly. The article explains that while a one-degree draft may be sufficient in some cases, more complex geometries often benefit from larger angles. Eggleston stresses that including draft from the start reduces maintenance costs and keeps cycle times consistent.

The third major area is wall thickness. When walls are uneven, thicker sections cool more slowly than thinner ones, leading to internal stresses, distortion, voids, or weak spots. Consistent wall thickness allows resin to flow evenly through the mold, producing stronger, more reliable components. If variation is unavoidable, gradual transitions should replace sudden changes to maintain flow and reduce stress concentrations. Eggleston highlights that designing for uniform wall thickness is one of the simplest and most effective ways to avoid injection molding defects.

Together, rib proportions, draft angles, and wall thickness may seem like small details, but they have a significant impact on manufacturing outcomes. Addressing them early in the design phase prevents costly rework, lowers scrap rates, and keeps schedules on track. The HelloNation article notes that collaboration between designers and mold makers helps catch potential issues before tooling is built, saving both time and money.

Thoughtful molded part design also improves material efficiency. Optimizing ribs and walls reduces the amount of resin required without sacrificing performance. This lowers costs while supporting sustainability goals by reducing waste. Small adjustments to draft angles can extend the life of tooling as well, since smoother part release causes less wear on mold surfaces. Eggleston adds that these benefits compound across large production runs, creating significant savings over time.

While simulation software can help predict flow, cooling, and stress, the article cautions that it cannot replace sound design principles. Established guidelines such as rib-to-wall ratios, draft requirements, and uniform wall thickness remain the most reliable ways to ensure success. Experienced mold designers bring valuable expertise to this process, refining geometry to fit both function and manufacturability. Eggleston underscores that the most reliable projects rely on proven fundamentals supported by expert input.

Ultimately, the HelloNation article concludes that molded part design determines the efficiency, cost, and reliability of injection molding. Sink marks, sticking parts, and warpage are not inevitable. They can be prevented by following best practices and addressing potential issues before tooling begins. Eggleston emphasizes that thoughtful design not only reduces risk but also ensures that finished parts meet both performance and aesthetic requirements.

The lesson is straightforward: smarter design leads to better results. A few careful decisions at the beginning of a project can prevent expensive setbacks and keep production moving smoothly. Ryan Eggleston’s perspective reinforces that in injection molding, attention to detail in molded part design is the fastest path to reliable outcomes.

The full article, Avoiding Common Mistakes in Molded Part Design, features the expertise of Ryan Eggleston, Manufacturing Expert with UTP Solutions dbu-Medi-Tec Plastics, as presented in HelloNation.

About HelloNation
HelloNation is a premier media platform that connects readers with trusted professionals and businesses across various industries. Through its innovative “edvertising” approach that blends educational content and storytelling, HelloNation delivers expert-driven articles that inform, inspire, and empower. Covering topics from home improvement and health to business strategy and lifestyle, HelloNation highlights leaders making a meaningful impact in their communities.

View original content to download multimedia:https://www.prnewswire.com/news-releases/in-grand-rapids-injection-molding-expert-ryan-eggleston-breaks-down-part-design-for-hellonation-302872614.html

SOURCE HelloNation

Continue Reading

Technology

Twenty Years After an Attic Startup, TydeCo Brings “HR & Finance Walk Into a Bar” Home

Published

on

By

After becoming a hit in Cape Town and Johannesburg, the event makes its US debut in Maryland with Sage on September 24

FREDERICK, Md., Sept. 8, 2026 /PRNewswire/ — In 2006, two college students started a bookkeeping practice from the attic of a rented house in Maryland. They had $1,500 in the bank and no clients, so they placed an advertisement on Craigslist. One of them was Matt Lescault, now CEO of TydeCo.

That practice became Lescault & Walderman, moved to a fully virtual model in 2010 and expanded from outsourced accounting into software implementation, integration and data.

Twenty years later, the company is TydeCo, operating in four countries with teams across 10 time zones.

This September, TydeCo will bring an idea shaped through that global growth back to the state where the business began. “HR & Finance Walk Into a Bar” makes its US debut September 24 after successful events in Cape Town and Johannesburg, with Sage joining TydeCo for the afternoon.

The complimentary event takes place from 2 p.m. to 5 p.m. at Charley’s Chesapeake Chophouse, Rio Lakefront in Gaithersburg. Designed for finance, HR and payroll leaders, owners and senior decision makers, it combines business conversations with four courses, paired drinks and live magic woven into one continuous story.

The concept was influenced in part by what happens when people leave the structure of the working day. Although TydeCo has operated virtually since 2010, Director of Marketing, Becky Clawson and Lescault occasionally meet at Charley’s when a conversation needs more room than a scheduled video call allows.

“When you sit down at your desk, you are automatically thinking about emails and everything that needs to be checked off,” Clawson said. “When you step outside that environment and talk face to face, your mindset opens. The best conversations and brainstorms happen when you are no longer in that preprogrammed thought process.”

The name “HR & Finance Walk Into a Bar” borrows from one of comedy’s most recognizable setups. And TydeCo put HR and finance at the center because the two functions make decisions about the same organization while often working with different information and separate systems.

“When the right people are part of the conversation, the outcome is better because everyone hears it firsthand and creates the answer together,” Clawson said.

That idea carries through the format. Speakers from finance, HR and payroll share real business experiences, while food, drinks and live magic develop alongside the conversation.

“This is not a business card exchange. This is not a 30-second elevator pitch. This is an experience,” Clawson said.

TydeCo first introduced the format in Cape Town before taking it to Johannesburg. The response established it as one of the company’s signature events and led to the decision to bring it to the US.

“We used South Africa as the test bed and asked whether the concept had legs. Resoundingly, it did,” Clawson said. “What stayed with me was the curiosity. People were willing to step outside the box and consider a business problem in a completely different way.”

During one South African event, guests entered different calculations into their phones. Each followed a different sequence, but when everyone pressed equal, every screen displayed the same number.

“That same number represents the core mission and vision we show up for every single day,” Clawson said. “We may come at the problem differently, but ultimately we are working toward the same outcome.”

The event’s move from South Africa to the US mirrors TydeCo’s own growth. In 2022, Lescault & Walderman acquired a majority stake in AWCape, a South African Sage Platinum Partner, and a minority stake in Applico, a Sage training specialist. The businesses began collaborating across US and African projects before coming together under the TydeCo name, chosen in reference to the tides connecting the continents.

Today, the teams work together across finance, HR and operational technology, supported by TydeCo’s Better Together value.

That value will be reflected in Maryland through TydeCo’s relationship with Sage and integrating them into to the same story rather than appearing as separate sponsor. Representatives from Sage will be attending.

Sage has been part of TydeCo’s evolution from an accounting practice into a global business systems partner. Sage Intacct will bring the financial management and enterprise resource planning perspective to the conversation, alongside human capital management technology.

The Maryland event will explore reporting clarity, accountability and connected data through contributions from Sage and TydeCo.

For TydeCo, however, the real measure of the event comes after the final performance.

“Where the real magic happens is seeing teams move from a conversation with their HR or finance counterpart into actually implementing new technology, new processes and more efficient ways to work together,” Clawson said.

“HR & Finance Walk Into a Bar” takes place from 2 p.m. to 5 p.m. on September 24, 2026, at Charley’s Chesapeake Chophouse, Rio Lakefront, Gaithersburg. Attendance is complimentary and limited.

Registration is available at tydeco.com/event/maryland-event-september. A Boston edition will follow in October.

About TydeCo

TydeCo is a global business transformation partner helping organizations connect finance, people and operational systems. Its services include software implementation and support, integration and automation, data and analytics, and outsourced bookkeeping, controller and CFO services. TydeCo operates in four countries, with teams working across 10 time zones.

tydeco.com

View original content to download multimedia:https://www.prnewswire.com/news-releases/twenty-years-after-an-attic-startup-tydeco-brings-hr–finance-walk-into-a-bar-home-302872857.html

SOURCE TydeCo

Continue Reading

Technology

Regpack Introduces Program Insights, Built Around the People Programs Serve

Published

on

By

SAN DIEGO, Sept. 8, 2026 /PRNewswire/ — Regpack, an online registration and payment platform, today announced Program Insights, an intuitive real-time dashboard that shows directors what is happening with their enrollment and their families while a season is still in motion.

For program directors and staff, registration is not a data point. It’s a kid who signed up, a family who came back, a seat that got filled. Program Insights is built around that. Directors can watch enrollment percentages fill in, class by class, as sign-ups arrive, see which sessions are close to full and which still have room, and see which families from last season have returned and which haven’t.

Additionally, it shows where people stop partway through signing up. If a class loses most of its interest at a particular step, that step becomes visible, and a director can change the form, the wording, or the price and see whether the next group makes it through. The rough spots stop being a mystery.

Every view comes with a short AI summary read of what it means and next steps, so directors and staff aren’t left interpreting a chart between pickup and payroll.

“Nobody starts a program because they love spreadsheets. They do it for the kids in the room, the attendees they bring in,” said Asaf Darash, founder of Regpack. “Directors already know their families better than any dashboard will. What they have asked us for is a faster way to see who is missing, who is coming back, and where a program needs attention, so the time goes to the students instead of the reporting.”

Program Insights is available now to Regpack customers on tiered packages

https://www.regpacks.com/features/registration-reporting/program-insights-dashboard

About Regpack

Regpack is an online registration and payment platform built for the people who run programs. Camps, after-school and enrichment programs, schools, nonprofits, and event organizers use it to handle sign-ups, collect payments, and manage participant information in one place.

Media Contact

Mandi Rogers, Marketing Director, Regpack – mandi@regpacks.com 

View original content to download multimedia:https://www.prnewswire.com/news-releases/regpack-introduces-program-insights-built-around-the-people-programs-serve-302872880.html

SOURCE Regpack

Continue Reading

Technology

Consumer Watchdog Alert Calls Out PG&E’s Bailout And PG&E CEO’s Misrepresentation

Published

on

By

SACRAMENTO, Calif., Sept. 8, 2026 /PRNewswire/ — A new Consumer Alert video published by Consumer Watchdog exposes the “bailout blackmail” that PG&E is engaging in to force the legislature to approve a bailout for the company in a special session. The company is cutting back on $2 billion in infrastructure that ratepayers have already paid for unless it gets a bailout, which the legislature has refused to do in its regular session.

The short video features an interview with former California Public Utilities Commission (PUC) President Loretta Lynch alleging that PG&E CEO Patti Poppe lied in a video. Poppe said that PG&E could not provide new services because it would cost it too much in borrowing costs. Lynch pointed out PG&E had already been paid for the new equipment in approved rate hikes with a 10% markup and the cost of taxes on the equipment.

Consumer Watchdog has petitioned the PUC to issue an order to show cause.

Watch the video.

“It’s bailout blackmail,” said former President of the California Public Utilities Commission Loretta Lynch in the Consumer Alert video. “The utility wanted, regardless of whether its negligence caused damage, to not be held liable for that damage, and thankfully the legislature said no. PG&E is trying to browbeat California policy makers into giving PG&E a get out of jail free card for its own liability.”

The Consumer Alert takes issue with this video statement published by PG&E CEO Patti Poppe: “PG&E collects money from customers through rates every year. We use nearly all of that to operate and maintain the existing gas and electric equipment. But that is not enough to build new equipment to keep people safe and energy reliable. That’s why we must raise billions of dollars more every year.”

Lynch responds in the Consumer Alert: “That’s bull. Ratepayers already pay for every single penny PG&E spends. Ratepayers pay $19 billion. In addition, ratepayers pay 10% on every single piece of equipment or power plant or physical infrastructure that they build, own, or maintain. We also pay the taxes on that 10%. So ratepayers end up paying 15 cents out of every dollar we pay for PG&E’s profit and to pay PG&E taxes on their own profit.”

Pope has said that if the legislature approves liability relief in bailout legislation she will spend the $2 billion she is withholding. Consumer Watchdog’s petition to the PUC asks for the Commission to require PG&E to answer why it is withholding the use of dollars ratepayers are already paying for and force a refund or to have those dollars spent.

“PG&E is just choosing to hold us hostage in order to get legal changes that will exempt itself from liability for its own negligence,” said Lynch. “So we need to just say no to PG&E. PG&E enjoys monopoly status because it has entered into a legal duty to serve all customers and to keep us safe. PG&E has plenty of money to do that. And if they don’t, let’s audit their books and see where they’re stashing the cash.”

View original content to download multimedia:https://www.prnewswire.com/news-releases/consumer-watchdog-alert-calls-out-pges-bailout-and-pge-ceos-misrepresentation-302872882.html

SOURCE Consumer Watchdog

Continue Reading

Trending