Connect with us

Technology

In Grand Rapids, Injection Molding Expert Ryan Eggleston Breaks Down Part Design for HelloNation

Published

on

GRAND RAPIDS, Mich., Sept. 8, 2026 /PRNewswire/ — What are the most common mistakes in molded part design, and how can they be avoided? According to a HelloNation article, small details in design often determine whether plastic injection molding runs smoothly or encounters costly setbacks. Ryan Eggleston of UTP Solutions dbu-Medi-Tec Plastics in Grand Rapids explains how careful attention to ribs, draft angles, and wall thickness can prevent defects and improve production efficiency.

The article makes clear that molded part design is just as important as the molding process itself. Poor choices at the design stage can cause delays, raise costs, and reduce product quality. Eggleston emphasizes that avoiding common pitfalls allows manufacturers to produce stronger, more reliable parts at lower overall expense.

One of the most frequent issues is improper rib design. Ribs are used to reinforce parts without adding excess wall thickness. However, when ribs are too thick at the base, they create sink marks and warpage as different sections cool unevenly. The HelloNation article recommends that rib thickness stay at about half the adjoining wall. This proportion prevents surface defects while maintaining structural strength. Ryan Eggleston notes that proper rib design supports both durability and appearance.

Draft angles represent another critical factor. Without draft, molded parts often stick inside the tool, requiring extra force for removal. This slows down production, increases wear on molds, and risks part damage. Even a small draft angle helps parts release smoothly. The article explains that while a one-degree draft may be sufficient in some cases, more complex geometries often benefit from larger angles. Eggleston stresses that including draft from the start reduces maintenance costs and keeps cycle times consistent.

The third major area is wall thickness. When walls are uneven, thicker sections cool more slowly than thinner ones, leading to internal stresses, distortion, voids, or weak spots. Consistent wall thickness allows resin to flow evenly through the mold, producing stronger, more reliable components. If variation is unavoidable, gradual transitions should replace sudden changes to maintain flow and reduce stress concentrations. Eggleston highlights that designing for uniform wall thickness is one of the simplest and most effective ways to avoid injection molding defects.

Together, rib proportions, draft angles, and wall thickness may seem like small details, but they have a significant impact on manufacturing outcomes. Addressing them early in the design phase prevents costly rework, lowers scrap rates, and keeps schedules on track. The HelloNation article notes that collaboration between designers and mold makers helps catch potential issues before tooling is built, saving both time and money.

Thoughtful molded part design also improves material efficiency. Optimizing ribs and walls reduces the amount of resin required without sacrificing performance. This lowers costs while supporting sustainability goals by reducing waste. Small adjustments to draft angles can extend the life of tooling as well, since smoother part release causes less wear on mold surfaces. Eggleston adds that these benefits compound across large production runs, creating significant savings over time.

While simulation software can help predict flow, cooling, and stress, the article cautions that it cannot replace sound design principles. Established guidelines such as rib-to-wall ratios, draft requirements, and uniform wall thickness remain the most reliable ways to ensure success. Experienced mold designers bring valuable expertise to this process, refining geometry to fit both function and manufacturability. Eggleston underscores that the most reliable projects rely on proven fundamentals supported by expert input.

Ultimately, the HelloNation article concludes that molded part design determines the efficiency, cost, and reliability of injection molding. Sink marks, sticking parts, and warpage are not inevitable. They can be prevented by following best practices and addressing potential issues before tooling begins. Eggleston emphasizes that thoughtful design not only reduces risk but also ensures that finished parts meet both performance and aesthetic requirements.

The lesson is straightforward: smarter design leads to better results. A few careful decisions at the beginning of a project can prevent expensive setbacks and keep production moving smoothly. Ryan Eggleston’s perspective reinforces that in injection molding, attention to detail in molded part design is the fastest path to reliable outcomes.

The full article, Avoiding Common Mistakes in Molded Part Design, features the expertise of Ryan Eggleston, Manufacturing Expert with UTP Solutions dbu-Medi-Tec Plastics, as presented in HelloNation.

About HelloNation
HelloNation is a premier media platform that connects readers with trusted professionals and businesses across various industries. Through its innovative “edvertising” approach that blends educational content and storytelling, HelloNation delivers expert-driven articles that inform, inspire, and empower. Covering topics from home improvement and health to business strategy and lifestyle, HelloNation highlights leaders making a meaningful impact in their communities.

View original content to download multimedia:https://www.prnewswire.com/news-releases/in-grand-rapids-injection-molding-expert-ryan-eggleston-breaks-down-part-design-for-hellonation-302872614.html

SOURCE HelloNation

Continue Reading

Technology

B&R Technology Merger Corp. Announces the Separate Trading of its Class A Ordinary Shares and Warrants, Commencing September 10, 2026

Published

on

By

NEW YORK, Sept. 8, 2026 /PRNewswire/ — B&R Technology Merger Corp. (Nasdaq: BRTMU) (the “Company”) announced today that, commencing September 10, 2026, holders of the units sold in the Company’s initial public offering may elect to separately trade the Company’s Class A ordinary shares and warrants included in the units. No fractional warrants will be issued upon separation of the units and only whole warrants will trade. The Class A ordinary shares and warrants that are separated will trade on the Nasdaq Stock Market under the symbols “BRTM” and “BRTMW,” respectively. Those units not separated will continue to trade on the Nasdaq Stock Market under the symbol “BRTMU.”

This press release shall not constitute an offer to sell or the solicitation of an offer to buy the securities of the Company, nor shall there be any sale of these securities in any state or jurisdiction in which such offer, solicitation or sale would be unlawful prior to registration or qualification under the securities laws of any such state or jurisdiction.

About B&R Technology Merger Corp.

B&R Technology Merger Corp. is a blank check company, also commonly referred to as a special purpose acquisition company, or SPAC, formed for the purpose of effecting a merger, amalgamation, share exchange, asset acquisition, share purchase, reorganization or similar business combination with one or more businesses. While the Company’s strategy allows for an initial business combination in any business or industry or at any stage of its corporate evolution, its primary focus is on technology growth businesses that has artificial intelligence (“AI”) tailwinds.

Forward-Looking Statements

This press release may include, and oral statements made from time to time by representatives of the Company may include, “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. Statements regarding possible business combinations and the financing thereof, and related matters, as well as all other statements other than statements of historical fact included in this press release are forward-looking statements. When used in this press release, words such as “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “intend,” “may,” “might,” “plan,” “possible,” “potential,” “predict,” “project,” “should,” “would” and similar expressions, as they relate to us or our management team, identify forward-looking statements. Such forward-looking statements are based on the beliefs of management, as well as assumptions made by, and information currently available to, the Company’s management. Actual results could differ materially from those contemplated by the forward-looking statements as a result of certain factors detailed in the Company’s filings with the Securities and Exchange Commission (“SEC”). All subsequent written or oral forward-looking statements attributable to us or persons acting on our behalf are qualified in their entirety by this paragraph. Forward-looking statements are subject to numerous conditions, many of which are beyond the control of the Company, including those set forth in the Risk Factors section of the Company’s registration statement and prospectus for the Company’s initial public offering filed with the SEC. The Company undertakes no obligation to update these statements for revisions or changes after the date of this release, except as required by law.

Company Contact
David York
Clark Callander
Steve Fletcher
B&R Technology Merger Corp.
info@bandrtechnology.com

View original content:https://www.prnewswire.com/news-releases/br-technology-merger-corp-announces-the-separate-trading-of-its-class-a-ordinary-shares-and-warrants-commencing-september-10-2026-302872797.html

SOURCE B&R Technology Merger Corp.

Continue Reading

Technology

Georgia Power encourages customers to take action during National Preparedness Month

Published

on

By

Company highlights important safety information and resources to help customers prepare for emergencies 

ATLANTA, Sept. 8, 2026 /PRNewswire/ — As the peak of hurricane season approaches, Georgia Power is reminding its 2.8 million customers to be prepared for emergencies. In support of National Preparedness Month, the company is once again partnering with the Federal Emergency Management Agency and the Georgia Emergency Management and Homeland Security Agency throughout September.

While the state has not yet experienced a major hurricane or tropical storm this season, National Preparedness Month encourages advance preparation for all types of potential emergencies in homes, businesses and communities. 

Georgia Power continues to invest in a stronger, more resilient electric grid that improves reliability for customers on both blue-sky days and during severe weather. Through Smart Grid technology, automation and self-healing capabilities, the company can identify outages faster, reroute power remotely and restore service more efficiently. In 2025 alone, Grid Investment Program projects improved reliability for more than 535,000 customers and, together with self-healing technology, prevented 108 million customer outage minutes while playing a critical role during hurricane season.

Georgia Power encourages all customers to take proactive measures to safeguard their homes and families before disasters strike, including:

Build an emergency kit – Gather enough supplies to sustain everyone in your household for several days, including food, water, medications, and other essentials. Be sure to consider the unique needs of each family member and pet, especially if an evacuation becomes necessary. It’s also a good idea to prepare a grab-and-go emergency kit with essential items so you can evacuate quickly if needed. Have an emergency plan – Develop an emergency plan and discuss it with your family and close friends before an emergency. Establish how you will communicate, where you will meet and what steps you will take if you need to evacuate or shelter in place. Planning ahead can help reduce stress, save valuable time and minimize costs during an emergency. Understand your risks – Understand your risks by learning about the hazards and emergencies most likely to affect your area. Knowing what could happen where you live, work and travel can help you make informed decisions and take the right steps to protect yourself, your family and your property. Visit the company’s Storm Center page for more information on preparing your home, building an emergency kit, and knowing your risks. 

Staying informed during emergencies such as hurricanes, tornadoes and severe thunderstorms is critical, and Georgia Power offers the following resources to help customers stay connected and informed: 

Outage Alerts – Customers subscribed to the free Georgia Power Outage Alerts service will receive personalized notifications and updates via text message. Check that your contact number is up to date to receive the latest information. Outage & Storm Center – Available at www.GeorgiaPower.com/Storm, customers can visit this site to ensure their contact information is updated to receive Outage Alerts, report and check the status of outages, and access useful safety tips and information. Customers can also report and check the status of an outage 24 hours a day by contacting Georgia Power at 888-891-0938. Outage Map – Housed within the Outage & Storm Center, Georgia Power’s interactive Outage Map provides near real-time information, allowing users to see where outages are occurring across the state and track estimated restoration times. The map is updated regularly from teams in the field. Georgia Power Mobile App – Download the Georgia Power mobile app for Apple and Android devices to access storm and outage information on the go. Social Media – Follow Georgia Power on FacebookInstagram and X for storm tips, outage updates, customer service and more. 

Safety Tips for Customers and Crews 

Watch for Georgia Power crews working across the state. If you must be on the roads, please move over one lane for utility vehicles stopped on the side of the road; it’s Georgia law. Never touch any downed or low-hanging wire. If going out, watch for and avoid down wires. They can be deadly. Never pull tree limbs off power lines yourself or enter areas with debris or downed trees, as downed power lines may be concealed. Customers should call 911 or Georgia Power immediately if they see a fallen or low-hanging power line. Take care if using a portable generator. Follow all manufacturer instructions, avoid using generators in enclosed spaces and be mindful of electrical safety. Visit our website for more generator safety tips

About Georgia Power
Georgia Power is the largest electric subsidiary of Southern Company (NYSE: SO), America’s premier energy company. Value, Reliability, Customer Service and Stewardship are the cornerstones of the company’s promise to 2.8 million customers in all but four of Georgia’s 159 counties. Committed to delivering clean, safe, reliable and affordable energy, Georgia Power maintains a diverse, innovative generation mix that includes nuclear, coal and natural gas, as well as renewables such as solar, hydroelectric and wind. Georgia Power offers rates below the national average, focuses on delivering world-class service to its customers every day and the company is recognized by J.D. Power as an industry leader in customer satisfaction. For more information, visit www.GeorgiaPower.com and connect with the company on Facebook (Facebook.com/GeorgiaPower), X (X.com/GeorgiaPower) and Instagram (Instagram.com/ga_power). 

 www.georgiapower.com

View original content to download multimedia:https://www.prnewswire.com/news-releases/georgia-power-encourages-customers-to-take-action-during-national-preparedness-month-302872805.html

SOURCE Georgia Power

Continue Reading

Technology

Nelnet Accessibility Services Now on Civic Marketplace

Published

on

By

State and local agencies can now access Nelnet’s accessibility assessment, remediation, and compliance services through a cooperative contract that requires no new request for proposal (RFP) ahead of approaching Department of Justice (DOJ) Americans with Disabilities Act (ADA) Title II compliance deadlines.

LINCOLN, Neb., Sept. 8, 2026 /PRNewswire/ — Nelnet Government Services today announced that its cooperative purchasing contract, awarded through the Alliance for Innovation (AFI), is now accessible through Civic Marketplace. By listing on Civic Marketplace, Nelnet gives local governments, public schools, and other public agencies nationwide a streamlined way to discover and procure its ADA Web Accessibility Consulting and ADA Web Accessibility Consulting and Design services.

As an awarded supplier through the AFI cooperative program, Nelnet’s services have already been competitively solicited and awarded in accordance with public procurement requirements. Through Civic Marketplace, eligible public agencies can access Nelnet’s services and pre-negotiated cooperative pricing without conducting a separate RFP, providing a faster path from accessibility need to implementation.

What Agencies Can Access

Accessibility Assessments: Expert-led audits of websites, applications, and documents that surface Web Content Accessibility Guidelines (WCAG) 2.1 barriers and produce a clear compliance roadmap.Remediation Services: Hands-on repair of websites, mobile apps, documents, and video so digital content works for people using assistive technology.Voluntary Product Accessibility Template (VPAT) and Accessibility Conformance Report (ACR) Reporting, Training & Ongoing Support: Standards-based compliance documentation, staff training, and Accessibility Team as a Service (ATaaS) for continuous governance as content changes.

“Every resident deserves digital services that work for them, and every agency deserves a partner who can help them get there without adding a lengthy procurement process,” said Marc Thorson, Lead Accessibility Architect at Nelnet. “Making our accessibility team available through Civic Marketplace means agencies can start real compliance work now, well ahead of the deadlines bearing down on them.”

Why This Matters

Under the Department of Justice’s ADA Title II rule, state and local government websites, apps, and digital content must meet WCAG 2.1 AA standards. The DOJ recently extended the compliance deadlines, giving larger public entities until April 26, 2027, and smaller public entities and special districts until April 26, 2028. But auditing, remediating, and retraining staff across years of legacy content takes longer than many agencies expect, and the deadline marks when compliance is required, not when the work should start.

Most agencies don’t need a seven-figure platform overhaul to get there. Many compliance gaps close for a fraction of that cost through focused assessment and remediation work, without the year a standalone RFP process usually consumes.

“Digital accessibility is a growing operational priority for local governments, and many agencies need specialized expertise to address it effectively,” said Michael Wilkes, President and CEO of the Alliance for Innovation. “Bringing Nelnet into our cooperative portfolio gives public agencies access to proven capabilities in an area that is becoming increasingly important to how governments operate and serve their communities.”

Nelnet has already put that model to work in state and local government: its accessibility team embedded with Colorado’s Office of Information Technology to bring the myColorado app, used by more than 1 million residents for driver’s licenses, DMV services, and benefit application, into WCAG 2.1 AA compliance.

Access This Contract Now on Civic Marketplace

Nelnet’s digital accessibility services are available now through Civic Marketplace. To explore the contract and begin procurement, view the Nelnet contract listing on Civic Marketplace, or contact Nelnet at AccessibilityWorkRequest@nelnet.net.

About Nelnet Government Services

Nelnet Government Services (NYSE: NNI) helps public sector organizations achieve and maintain digital accessibility compliance while creating more inclusive experiences for the people they serve. Our U.S.-based accessibility team partners with agencies to assess, remediate, monitor, and govern digital content, websites, applications, and documents. Through accessibility assessments, remediation services, training, reporting, and ongoing compliance support, we help agencies build sustainable accessibility programs that reduce risk, increase access, and improve service delivery. See Nelnet’s digital accessibility services at Nelnet.com.

About Alliance for Innovation

AFI is a nonprofit association of governments dedicated to fostering innovation and excellence in local government. AFI assists local governments in implementing innovative solutions to enhance efficiency, service delivery, and community impact. The organization emphasizes strategic thinking, emerging technologies, and best practices to equip public agencies with the knowledge and support to address evolving challenges.

AFI offers various programs, including innovation academies, workshops, and a comprehensive knowledge network that allows local governments to share success stories and lessons learned. It hosts annual conferences and webinars that unite municipal leaders, industry experts, and academic researchers to explore trends in governance, sustainability, civic engagement, and operational improvements. By promoting a culture of innovation, AFI empowers local governments to be more adaptive, resilient, and responsive to the needs of their communities, ultimately enhancing the quality of life for citizens nationwide.

About Civic Marketplace

Civic Marketplace is the AI procurement platform built for local governments and free for every SLED entity to use. By removing cost as a barrier, we make it easier for cities, counties, and school districts to modernize how they buy goods and services without adding strain to already tight budgets.

Our platform connects government buyers to a network of pre-approved suppliers, ensuring every contract meets compliance and quality standards from the start. We’re especially committed to expanding access for historically underutilized businesses, helping local governments support regional suppliers and strengthen the communities they serve.

Procurement doesn’t have to be slow, complicated, or expensive. Civic Marketplace is backed by venture investment and built to prove it. Learn more at civicmarketplace.com.

View original content:https://www.prnewswire.com/news-releases/nelnet-accessibility-services-now-on-civic-marketplace-302872789.html

SOURCE Nelnet Government Services

Continue Reading

Trending