New Orders Growing and Backlogs Contracting; Production Growing and Employment Contracting; Supplier Deliveries Slowing; Raw Materials Inventories Contracting; Customers’ Inventories Too Low; Prices Increasing; Exports Unchanged and Imports Contracting

TEMPE, Ariz., Jan. 3, 2025 /PRNewswire/ — Economic activity in the manufacturing sector contracted in December for the ninth consecutive month and the 25th time in the last 26 months, say the nation’s supply executives in the latest Manufacturing ISM® Report On Business®.

The report was issued today by Timothy R. Fiore, CPSM, C.P.M., Chair of the Institute for Supply Management® (ISM®) Manufacturing Business Survey Committee:

“The Manufacturing PMI® registered 49.3 percent in December, 0.9 percentage point higher compared to the 48.4 percent recorded in November. The overall economy continued in expansion for the 56th month after one month of contraction in April 2020. (A Manufacturing PMI® above 42.5 percent, over a period of time, generally indicates an expansion of the overall economy.) The New Orders Index continued in expansion territory for the second month after seven months of contraction, strengthening to 52.5 percent, 2.1 percentage points higher than the 50.4 percent recorded in November. The December reading of the Production Index (50.3 percent) is 3.5 percentage points higher than November’s figure of 46.8 percent. The index returned to expansion after six months in contraction. The Prices Index continued in expansion (or ‘increasing’) territory, registering 52.5 percent, up 2.2 percentage points compared to the reading of 50.3 percent in November. The Backlog of Orders Index registered 45.9 percent, up 4.1 percentage points compared to the 41.8 percent recorded in November. The Employment Index registered 45.3 percent, down 2.8 percentage points from November’s figure of 48.1 percent.

“The Supplier Deliveries Index indicated marginally slower deliveries, registering 50.1 percent, 1.4 percentage points higher than the 48.7 percent recorded in November. (Supplier Deliveries is the only ISM® Report On Business® index that is inversed; a reading of above 50 percent indicates slower deliveries, which is typical as the economy improves and customer demand increases.) The Inventories Index registered 48.4 percent, up 0.3 percentage point compared to November’s reading of 48.1 percent.

“The New Export Orders Index’s ‘unchanged’ reading of 50 percent is 1.3 percentage points higher than the 48.7 percent registered in November. The Imports Index remained in contraction territory in December, registering 49.7 percent, 2.1 percentage points higher than November’s reading of 47.6 percent.”

Fiore continues, “U.S. manufacturing activity contracted again in December, but at a slower rate compared to November. Demand showed signs of improving, while output stabilized and inputs stayed accommodative. Demand analysis includes: the (1) New Orders Index remaining in expansion territory, (2) New Export Orders Index increasing (up 1.3 percentage points and now ‘unchanged’), (3) Backlog of Orders Index slowing its rate of decline but continuing in contraction territory, and (4) Customers’ Inventories Index dropping into ‘too low’ territory. Output (measured by the Production and Employment indexes) was positive; factory output stabilized compared to November, indicating that panelists’ companies are executing to plan. Employment contracted as final head-count adjustments were likely taken to prepare for 2025. Inputs — defined as supplier deliveries, inventories, prices and imports — generally continued to accommodate future demand growth, with inventories and imports improving marginally (though remaining in contraction), prices increasing and supplier deliveries marginally slowing.

“Demand improved, production execution met November’s performance (and companies’ plans), de-staffing continued (but should end soon), and price growth was marginal. Fifty-two percent of manufacturing gross domestic product (GDP) contracted in December, down from 66 percent in November. The share of manufacturing sector GDP registering a composite PMI® calculation at or below 45 percent (a good barometer of overall manufacturing weakness) was 49 percent in December, a 1-percentage point increase compared to the 48 percent reported in November. None of the six largest manufacturing industries expanded in December, down from two in November,” says Fiore.

The seven manufacturing industries reporting growth in December — listed in order — are: Primary Metals; Electrical Equipment, Appliances & Components; Wood Products; Furniture & Related Products; Paper Products; Miscellaneous Manufacturing; and Plastics & Rubber Products. The seven industries reporting contraction in December — in the following order — are: Textile Mills; Fabricated Metal Products; Printing & Related Support Activities; Machinery; Chemical Products; Transportation Equipment; and Nonmetallic Mineral Products.

WHAT RESPONDENTS ARE SAYING

“Slightly lower due to seasonality and end-of-year destocking.” [Chemical Products]”Automotive and powersport volume decreases.” [Transportation Equipment]”We are seeing a softening in sales. This is concerning as it’s our peak season.” [Food, Beverage & Tobacco Products]”We are constrained by technical labor, despite higher-than-normal backlog.” [Computer & Electronic Products]”Significant slowdown in production requirements in the last two months of the year.” [Machinery]”Order levels well below forecast projections.” [Fabricated Metal Products]”The increase in new orders has our plant at full capacity.” [Electrical Equipment, Appliances & Components]”Combo of seasonal factors plus increased demand outlook for 2025.” [Miscellaneous Manufacturing]”There is definitely an uptick this month, though not a stable one.” [Primary Metals]”The orders have increased slightly due to seasonal restocking.” [Plastics & Rubber Products]

Manufacturing ISM® Report On Business® data is seasonally adjusted for the New Orders, Production, Employment and Inventories indexes.

*Number of months moving in current direction.

COMMODITIES REPORTED UP/DOWN IN PRICE AND IN SHORT SUPPLY

Commodities Up in Price
Aluminum (13); Caustic Soda (2); Copper (3); Electronic Components; Labor — Temporary; Methanol; Natural Gas (3); Packaging Materials; Steel — General*; Steel — High Carbon; and Steel-Making Elements*.

Commodities Down in Price
Diesel Fuel (2); Plastic Resin (2); Polypropylene Resin; Solvents (2); Steel — General*; Steel — Hot Rolled (2); Steel — Scrap; and Steel-Making Elements*.

Commodities in Short Supply
Electrical Components (51); Electronic Components (9); and Labor — Construction Services and Skilled.

Note: The number of consecutive months the commodity is listed is indicated after each item.

*Indicates both up and down in price.

DECEMBER 2024 MANUFACTURING INDEX SUMMARIES

Manufacturing PMI®
The U.S. manufacturing sector contracted for the ninth consecutive month in December, as the Manufacturing PMI® registered 49.3 percent, 0.9 percentage point higher compared to the 48.4 percent reported in November. “After breaking a 16-month streak of contraction by expanding in March, the manufacturing sector has contracted for the last nine months. Of the five subindexes that directly factor into the Manufacturing PMI®, three (New Orders, Production and Supplier Deliveries) were in expansion territory, compared to only one in November. The Employment Index remained in contraction, but the New Orders Index moved further into expansion in December. Of the six biggest manufacturing industries, none registered growth,” says Fiore. A reading above 50 percent indicates that the manufacturing sector is generally expanding; below 50 percent indicates that it is generally contracting.

A Manufacturing PMI® above 42.5 percent, over a period of time, generally indicates an expansion of the overall economy. Therefore, the December Manufacturing PMI® indicates the overall economy grew for the 56th straight month after last contracting in April 2020. “The past relationship between the Manufacturing PMI® and the overall economy indicates that the December reading (49.3 percent) corresponds to a change of plus-1.9 percent in real gross domestic product (GDP) on an annualized basis,” says Fiore.

THE LAST 12 MONTHS

New Orders
ISM®’s New Orders Index expanded in December for the second consecutive month after seven months in contraction, registering 52.5 percent, an increase of 2.1 percentage points compared to November’s figure of 50.4 percent. The New Orders Index hasn’t indicated consistent growth since a 24-month streak of expansion ended in May 2022. “Of the six largest manufacturing sectors, two (Food, Beverage & Tobacco Products; and Computer & Electronic Products) reported increased new orders. Panelists noted an improved level of demand performance, with a 1.5-to-1 ratio of positive comments versus those expressing concern about near-term demand, an improvement compared to November,” says Fiore. A New Orders Index above 52.3 percent, over time, is generally consistent with an increase in the Census Bureau’s series on manufacturing orders (in constant 2000 dollars).

The six manufacturing industries that reported growth in new orders in December, in order, are: Electrical Equipment, Appliances & Components; Paper Products; Food, Beverage & Tobacco Products; Miscellaneous Manufacturing; Primary Metals; and Computer & Electronic Products. The eight industries reporting a decline in new orders in December — in the following order — are: Textile Mills; Printing & Related Support Activities; Nonmetallic Mineral Products; Wood Products; Transportation Equipment; Fabricated Metal Products; Plastics & Rubber Products; and Machinery.

Production
The Production Index emerged into expansion territory in December, registering 50.3 percent, 3.5 percentage points higher than the November reading of 46.8 percent. Prior to this month’s reading, the index was in contraction territory for six consecutive months. The last time the index registered above 50 percent was in May (50.2 percent). Of the six largest manufacturing sectors, only one (Computer & Electronic Products) reported increased production. “Production levels were stable to November’s performance, indicating that re-planning factory floor activity has likely been completed, head counts are likely synchronized with factory demand, and panelists are fully staffed and aligned for 2025,” says Fiore. An index above 52.2 percent, over time, is generally consistent with an increase in the Federal Reserve Board’s Industrial Production figures.

The five industries reporting growth in production during the month of December are: Textile Mills; Plastics & Rubber Products; Wood Products; Computer & Electronic Products; and Primary Metals. The six industries reporting a decrease in production in December, in order, are: Printing & Related Support Activities; Fabricated Metal Products; Nonmetallic Mineral Products; Machinery; Chemical Products; and Transportation Equipment. Six industries reported no change in production levels in December as compared to November.

Employment
ISM®’s Employment Index registered 45.3 percent in December, 2.8 percentage points lower than the November reading of 48.1 percent. “The index contracted for the seventh consecutive month and the 14th out of the last 15 months. Of the six big manufacturing sectors, none expanded employment in December. Respondents’ companies are continuing to reduce head counts through layoffs, attrition and hiring freezes. This action is supported in December by the approximately 1-to-2 ratio of hiring versus staff-reduction comments, compared to a 1-to-1.5 ratio the previous month, meaning more workforce reduction activity is occurring as we close 2025,” says Fiore. An Employment Index above 50.3 percent, over time, is generally consistent with an increase in the Bureau of Labor Statistics (BLS) data on manufacturing employment.

Of 18 manufacturing industries, the two industries reporting employment growth in December are: Electrical Equipment, Appliances & Components; and Plastics & Rubber Products. The nine industries reporting a decrease in employment in December, in the following order, are: Textile Mills; Fabricated Metal Products; Machinery; Chemical Products; Furniture & Related Products; Food, Beverage & Tobacco Products; Primary Metals; Transportation Equipment; and Miscellaneous Manufacturing. Six industries reported no change in employment levels in December as compared to November.

Supplier Deliveries†
Delivery performance of suppliers to manufacturing organizations was marginally slower in December, with the Supplier Deliveries Index registering 50.1 percent, a 1.4-percentage point increase compared to the reading of 48.7 percent reported in November. This expansion follows a contraction in November preceded by four consecutive months of slower deliveries, with four straight months of faster deliveries before that. After a reading of 52.4 percent in September 2022, the index went into contraction territory the following month and remained there for 20 out of 21 months (with February 2024 as the exception). Of the six big industries, two (Computer & Electronic Products; and Food, Beverage & Tobacco Products) reported slower supplier deliveries in December. “Supplier deliveries moved into ‘slower’ territory as supplier delivery performance continues to meet the expectations of panelists’ customers,” says Fiore. A reading below 50 percent indicates faster deliveries, while a reading above 50 percent indicates slower deliveries.

The six manufacturing industries reporting slower supplier deliveries in December — listed in order — are: Furniture & Related Products; Nonmetallic Mineral Products; Primary Metals; Computer & Electronic Products; Electrical Equipment, Appliances & Components; and Food, Beverage & Tobacco Products. The three industries reporting faster supplier deliveries in December are: Fabricated Metal Products; Chemical Products; and Machinery. Eight industries reported no change in supplier deliveries in December as compared to November.

Inventories
The Inventories Index registered 48.4 percent in December, up 0.3 percentage point compared to the reading of 48.1 percent reported in November. The last time the Inventories Index registered above 50 percent was in August, when it registered 50.3 percent. “Manufacturing inventories continue to contract, though rates have slowed in in the last two months as panelists continue to manage working capital. This month’s index reading indicating a slowing rate of contraction suggests that companies are willing to invest more for the future, to (1) better perform to their customers’ delivery demands or (2) advance material deliveries to avoid potential tariffs, or a combination of both. Of the six big industries, none reported expanding manufacturing inventories in December,” says Fiore. An Inventories Index greater than 44.4 percent, over time, is generally consistent with expansion in the Bureau of Economic Analysis (BEA) figures on overall manufacturing inventories (in chained 2000 dollars).

Of 18 manufacturing industries, the five industries reporting higher inventories in December are: Primary Metals; Wood Products; Furniture & Related Products; Nonmetallic Mineral Products; and Electrical Equipment, Appliances & Components. The eight industries reporting lower inventories in December — in the following order — are: Textile Mills; Fabricated Metal Products; Computer & Electronic Products; Chemical Products; Plastics & Rubber Products; Food, Beverage & Tobacco Products; Machinery; and Transportation Equipment.

Customers’ Inventories†
ISM®’s Customers’ Inventories Index registered a reading of 46.7 percent in December, down 1.7 percentage points compared to the 48.4 percent reported in November. “Customers’ inventory levels in December have dropped to the high side of ‘too low.’ Panelists are reporting that the amounts of their products in their customers’ inventories suggest a demand level that is positive for future production,” says Fiore.

The four industries reporting customers’ inventories as too high in December are: Textile Mills; Wood Products; Plastics & Rubber Products; and Miscellaneous Manufacturing. The 10 industries reporting customers’ inventories as too low in December, in order, are: Food, Beverage & Tobacco Products; Paper Products; Furniture & Related Products; Electrical Equipment, Appliances & Components; Machinery; Primary Metals; Computer & Electronic Products; Fabricated Metal Products; Transportation Equipment; and Chemical Products.

Prices†
The ISM® Prices Index registered 52.5 percent, 2.2 percentage points higher compared to the November reading of 50.3 percent, indicating raw materials prices increased for the third straight month in December after a decrease in September. Of the six largest manufacturing industries, three — Food, Beverage & Tobacco Products; Machinery; and Computer & Electronic Products — reported price increases in December. “The Prices Index indicated increasing prices in December for the third consecutive month, but at weak rates. Aluminum, basic chemicals, copper and natural gas registered increases, offset by steel, plastic resins and diesel fuel moving down in price. Fourteen percent of companies reported higher prices in December, compared to 12 percent in November,” says Fiore. A Prices Index above 52.8 percent, over time, is generally consistent with an increase in the Bureau of Labor Statistics (BLS) Producer Price Index for Intermediate Materials.

In December, the seven industries that reported paying increased prices for raw materials, in order, are: Primary Metals; Wood Products; Food, Beverage & Tobacco Products; Miscellaneous Manufacturing; Machinery; Computer & Electronic Products; and Electrical Equipment, Appliances & Components. The three industries report paying decreased prices for raw materials in December are: Plastics & Rubber Products; Chemical Products; and Fabricated Metal Products. Seven industries reported no change in prices in December as compared to November.

Backlog of Orders†
ISM®’s Backlog of Orders Index registered 45.9 percent, an increase of 4.1 percentage points compared to the November reading of 41.8 percent, indicating order backlogs contracted for the 27th consecutive month after a 27-month period of expansion. Of the six largest manufacturing industries, two (Food, Beverage & Tobacco Products; and Computer & Electronic Products) reported expanded order backlogs in December. “In December, the index recorded its best performance since April 2024 (45.4 percent), as new orders coupled with stable production levels slowed the rate of declining backlogs,” says Fiore.

Of the 18 manufacturing industries, three reported growth in order backlogs in December: Food, Beverage & Tobacco Products; Computer & Electronic Products; and Electrical Equipment, Appliances & Components. The 10 industries reporting lower backlogs in December — in the following order — are: Textile Mills; Primary Metals; Printing & Related Support Activities; Furniture & Related Products; Plastics & Rubber Products; Wood Products; Machinery; Transportation Equipment; Chemical Products; and Miscellaneous Manufacturing.

New Export Orders†
ISM®’s New Export Orders Index registered an “unchanged” reading of 50 percent in December, up 1.3 percentage points from November’s reading of 48.7 percent. “The New Export Orders Index reading indicates that export orders were ‘unchanged’ from last month, following six straight months of contraction. New export orders stabilized this month as international trading partners are showing signs of demand recovery as we enter 2025,” says Fiore.

The four industries reporting growth in new export orders in December are: Plastics & Rubber Products; Food, Beverage & Tobacco Products; Computer & Electronic Products; and Miscellaneous Manufacturing. The four industries reporting a decrease in new export orders in December are: Primary Metals; Transportation Equipment; Machinery; and Chemical Products. Eight industries reported no change in exports in December.

Imports†
ISM®’s Imports Index continued to indicate cooling in December; the reading of 49.7 percent is 2.1 percentage points higher compared to the reading of 47.6 reported in November. “Imports contracted for the seventh month in a row after five consecutive months of expansion, preceded by 14 consecutive months of contraction. Imports moved closer to growth as inventory constraints weaken and panelists act to better absorb any potential tariff impact in the future,” says Fiore.

The seven industries reporting an increase in import volumes in December, in order, are: Wood Products; Plastics & Rubber Products; Furniture & Related Products; Food, Beverage & Tobacco Products; Machinery; Electrical Equipment, Appliances & Components; and Computer & Electronic Products. The five industries that reported lower volumes of imports in December are: Paper Products; Printing & Related Support Activities; Primary Metals; Transportation Equipment; and Fabricated Metal Products.

†The Supplier Deliveries, Customers’ Inventories, Prices, Backlog of Orders, New Export Orders, and Imports indexes do not meet the accepted criteria for seasonal adjustments.

Buying Policy
The average commitment lead time for Capital Expenditures in December was 175 days, an increase of five days compared to November. Average lead time in December for Production Materials was 81 days, an increase of two days compared to November. Average lead time for Maintenance, Repair and Operating (MRO) Supplies was 46 days, an increase of two days compared to November.

About This Report
DO NOT CONFUSE THIS NATIONAL REPORT with the various regional purchasing reports released across the country. The national report’s information reflects the entire U.S., while the regional reports contain primarily regional data from their local vicinities. Also, the information in the regional reports is not used in calculating the results of the national report. The information compiled in this report is for the month of December 2024.

The data presented herein is obtained from a survey of manufacturing supply executives based on information they have collected within their respective organizations. ISM® makes no representation, other than that stated within this release, regarding the individual company data collection procedures. The data should be compared to all other economic data sources when used in decision-making.

Data and Method of Presentation
The Manufacturing ISM® Report On Business® is based on data compiled from purchasing and supply executives nationwide. The composition of the Manufacturing Business Survey Committee is stratified according to the North American Industry Classification System (NAICS) and each of the following NAICS-based industries’ contribution to gross domestic product (GDP): Food, Beverage & Tobacco Products; Textile Mills; Apparel, Leather & Allied Products; Wood Products; Paper Products; Printing & Related Support Activities; Petroleum & Coal Products; Chemical Products; Plastics & Rubber Products; Nonmetallic Mineral Products; Primary Metals; Fabricated Metal Products; Machinery; Computer & Electronic Products; Electrical Equipment, Appliances & Components; Transportation Equipment; Furniture & Related Products; and Miscellaneous Manufacturing (products such as medical equipment and supplies, jewelry, sporting goods, toys and office supplies). The data is weighted based on each industry’s contribution to GDP. According to BEA estimates (the average of the fourth quarter 2022 GDP estimate and the GDP estimates for first, second, and third quarter 2023, as released on December 21, 2023), the six largest manufacturing industries are: Chemical Products; Transportation Equipment; Food, Beverage & Tobacco Products; Computer & Electronic Products; Machinery; and Fabricated Metal Products.

Survey responses reflect the change, if any, in the current month compared to the previous month. For nine indicators (New Orders, Backlog of Orders, New Export Orders, Imports, Production, Supplier Deliveries, Inventories, Employment, and Prices), this report shows the percentage reporting each response, the net difference between the number of responses in the positive economic direction (higher, better and slower for Supplier Deliveries) and the negative economic direction (lower, worse and faster for Supplier Deliveries), and the diffusion index. For Customers’ Inventories, respondents report their assessment of their customers’ stock levels of respondent companies’ products this month (rather than last month): too high, about right, and too low. Responses are raw data and are never changed. The diffusion index includes the percent of positive responses plus one-half of those responding the same (considered positive).

The resulting single index number for those meeting the criteria for seasonal adjustments (Manufacturing PMI®, New Orders, Production, Employment and Inventories) is then seasonally adjusted to allow for the effects of repetitive intra-year variations resulting primarily from normal differences in weather conditions, various institutional arrangements, and differences attributable to non-moveable holidays. All seasonal adjustment factors are subject annually to relatively minor changes when conditions warrant them. The Manufacturing PMI® is a composite index based on the diffusion indexes of five of the indexes with equal weights: New Orders (seasonally adjusted), Production (seasonally adjusted), Employment (seasonally adjusted), Supplier Deliveries, and Inventories (seasonally adjusted).

Diffusion indexes have the properties of leading indicators and are convenient summary measures showing the prevailing direction of change and the scope of change. A Manufacturing PMI® reading above 50 percent indicates that the manufacturing economy is generally expanding; below 50 percent indicates that it is generally declining. A Manufacturing PMI® above 42.5 percent, over a period of time, indicates that the overall economy, or gross domestic product (GDP), is generally expanding; below 42.5 percent, it is generally declining. The distance from 50 percent or 42.5 percent is indicative of the extent of the expansion or decline. With some of the indicators within this report, ISM® has indicated the departure point between expansion and decline of comparable government series, as determined by regression analysis. For the Customers’ Inventories Index, numerically, a reading: above 50 percent is “too high,” equal to 50 percent is “about right,” and below 50 percent is “too low.” However, in practice and in the context of other data, customers’ inventories may be considered to be “about right” if the diffusion index is between 52 percent (the high side of about right) and 48 percent (the low side of about right).

The Manufacturing ISM® Report On Business® survey is sent out to Manufacturing Business Survey Committee respondents the first part of each month. Respondents are asked to report on information for the current month for U.S. operations only. ISM® receives survey responses throughout most of any given month, with the majority of respondents generally waiting until late in the month to submit responses to give the most accurate picture of current business activity. ISM® then compiles the report for release on the first business day of the following month.

The industries reporting growth, as indicated in the Manufacturing ISM® Report On Business® monthly report, are listed in the order of most growth to least growth. For the industries reporting contraction or decreases, those are listed in the order of the highest level of contraction/decrease to the least level of contraction/decrease.

Responses to Buying Policy reflect the percent reporting the current month’s lead time, the approximate weighted number of days ahead for which commitments are made for Capital Expenditures; Production Materials; and Maintenance, Repair and Operating (MRO) Supplies, expressed as hand-to-mouth (five days), 30 days, 60 days, 90 days, six months (180 days), a year or more (360 days), and the weighted average number of days. These responses are raw data, never revised, and not seasonally adjusted.

ISM ROB Content
The Institute for Supply Management® (“ISM”) Report On Business® (both Manufacturing and Non-Manufacturing) (“ISM ROB”) contains information, text, files, images, video, sounds, musical works, works of authorship, applications, and any other materials or content (collectively, “Content”) of ISM (“ISM ROB Content”). ISM ROB Content is protected by copyright, trademark, trade secret, and other laws, and as between you and ISM, ISM owns and retains all rights in the ISM ROB Content. ISM hereby grants you a limited, revocable, nonsublicensable license to access and display on your individual device the ISM ROB Content (excluding any software code) solely for your personal, non-commercial use. The ISM ROB Content shall also contain Content of users and other ISM licensors. Except as provided herein or as explicitly allowed in writing by ISM, you shall not copy, download, stream, capture, reproduce, duplicate, archive, upload, modify, translate, publish, broadcast, transmit, retransmit, distribute, perform, display, sell, or otherwise use any ISM ROB Content.

Except as explicitly and expressly permitted by ISM, you are strictly prohibited from creating works or materials (including but not limited to tables, charts, data streams, time-series variables, fonts, icons, link buttons, wallpaper, desktop themes, online postcards, montages, mashups and similar videos, greeting cards, and unlicensed merchandise) that derive from or are based on the ISM ROB Content. This prohibition applies regardless of whether the derivative works or materials are sold, bartered, or given away. You shall not either directly or through the use of any device, software, internet site, web-based service, or other means remove, alter, bypass, avoid, interfere with, or circumvent any copyright, trademark, or other proprietary notices marked on the Content or any digital rights management mechanism, device, or other content protection or access control measure associated with the Content including geo-filtering mechanisms. Without prior written authorization from ISM, you shall not build a business utilizing the Content, whether or not for profit.

You shall not create, recreate, distribute, incorporate in other work, or advertise an index of any portion of the Content unless you receive prior written authorization from ISM. Requests for permission to reproduce or distribute ISM ROB Content can be made by contacting in writing at: ISM Research, Institute for Supply Management, 309 West Elliot Road, Suite 113, Tempe, Arizona 85284-1556, or by emailing kcahill@ismworld.org. Subject: Content Request.

ISM shall not have any liability, duty, or obligation for or relating to the ISM ROB Content or other information contained herein, any errors, inaccuracies, omissions or delays in providing any ISM ROB Content, or for any actions taken in reliance thereon. In no event shall ISM be liable for any special, incidental, or consequential damages arising out of the use of the ISM ROB. Report On Business®, PMI®, Manufacturing PMI®, Services PMI®, Hospital PMI®, and NMI® are registered trademarks of Institute for Supply Management®. Institute for Supply Management® and ISM® are registered trademarks of Institute for Supply Management, Inc.

About Institute for Supply Management® (ISM®)
Institute for Supply Management® (ISM®) is the first and leading not-for-profit professional supply management organization worldwide. Its community of more than 50,000 in more than 100 countries manages about US$1 trillion in corporate and government supply chain procurement annually. Founded in 1915 by practitioners, ISM is committed to advancing the practice of supply management to drive value and competitive advantage for its members, contributing to a prosperous and sustainable world. ISM empowers and leads the profession through the ISM® Report On Business®, its highly regarded certification and training programs, corporate services, events and assessments. The ISM® Report On Business®, Manufacturing, Services, and Hospital, are three of the most reliable economic indicators available, providing guidance to supply management professionals, economists, analysts, and government and business leaders. For more information, please visit: www.ismworld.org.

The full text version of the Manufacturing ISM® Report On Business® is posted on ISM®’s website at www.ismrob.org on the first business day* of every month after 10:00 a.m. ET. The one exception is in January when the report is released on the second business day of the month.

The next Manufacturing ISM® Report On Business® featuring January 2025 data will be released at 10:00 a.m. ET on Monday, February 3, 2025.

*Unless the New York Stock Exchange is closed.

View original content to download multimedia:https://www.prnewswire.com/news-releases/manufacturing-pmi-at-49-3-december-2024-manufacturing-ism-report-on-business-302341381.html

SOURCE Institute for Supply Management