Connect with us

Technology

CAE announces renewal of normal course issuer bid

Published

on

MONTREAL, June 5, 2026 /CNW/ – (NYSE: CAE) (TSX: CAE) – CAE Inc. (“CAE”) today announced that it has received regulatory approval to renew its normal course issuer bid (“NCIB”) to purchase, for cancellation, up to 16,073,033 of its common shares commencing June 10, 2026, and ending June 9, 2027.

The maximum number of common shares that may be repurchased under the program represents approximately five percent (5%) of the issued and outstanding common shares of CAE, as of May 29, 2026. The actual number of common shares purchased under the NCIB, the timing of purchases and the price at which the common shares are bought will depend upon management discretion based on factors such as market conditions. As of May 29, 2026, CAE had 321,460,674 common shares issued and outstanding.

Purchases under the NCIB will be made through the facilities of the Toronto Stock Exchange (“TSX”) in accordance with the TSX’s applicable policies or the facilities of the New York Stock Exchange (“NYSE”) in compliance with applicable NYSE rules and policies and U.S. laws, or in such other manner as may be permitted under applicable stock exchange rules and applicable securities laws, including through alternative Canadian and US trading platforms and privately-negotiated, off-exchange block purchases. In the case of off-exchange block purchases, purchases will be at a discount to the prevailing market price in accordance with and subject to the terms of applicable exemptive relief.

TD Securities Inc. (“TD”) has agreed to act as CAE’s designated broker to make purchases of common shares pursuant to the NCIB. CAE has also entered into an automatic repurchase plan (“ARP”) with TD allowing it to purchase common shares under the NCIB when CAE would ordinarily not be permitted to purchase shares due to regulatory restrictions and customary self-imposed black-out periods. Before entering a black-out period, CAE may, but is not required to, instruct TD to make purchases under the NCIB during such a period based on parameters set by CAE prior to the black-out period in accordance with the ARP, TSX rules and applicable securities laws. All purchases made under the ARP are included in computing the number of common shares purchased under the NCIB. The ARP has been pre-cleared by the TSX and will be implemented and effective June 10, 2026, and will terminate on the earliest of the date on which: (i) the NCIB expires; (ii) the repurchase limit on the NCIB has been reached; (iii) CAE terminates the ARP in accordance with its terms; and (iv) TD terminates the ARP in accordance with its terms. The ARP constitutes an “automatic securities purchase plan” under applicable Canadian securities laws. The price CAE will pay for any common shares will be the market price at the time of acquisition, plus brokerage fees.

During the period that the NCIB is outstanding, CAE does not intend to make purchases of its common shares other than by means of open market transactions or such other means as may be permitted or approved by any applicable securities regulator.

The average daily trading volume of CAE’s common shares through the facilities of the TSX over the last six completed calendar months was 944,026 common shares (“ADTV”). Accordingly, under the TSX rules and policies, CAE will be entitled on any trading day to purchase up to 25% of the ADTV, which totals 236,006 common shares, for the next 12-month period of the NCIB. In excess of the daily repurchase limit, CAE may make, once per week, a block purchase (as such term is defined in the TSX Company Manual) of common shares not owned directly or indirectly by any insiders, which may exceed such daily limit, in accordance with the TSX rules.

All common shares purchased pursuant to the NCIB will be cancelled.

Under the normal course issuer bid which began on June 10, 2025, and which will expire on June 9, 2026, CAE received approval from the TSX to purchase up to 16,019,294 common shares. As at May 29, 2026, CAE had purchased a total of 565,259 common shares thereunder at a volume-weighted average price of $35.4418 per common share, for total consideration of $20.0 million. Such purchases were effected through the facilities of the TSX and Canadian alternative trading systems.

The NCIB is being established as part of CAE’s capital allocation strategy. The Board of Directors of CAE believes that any purchases made under the NCIB will be in the best interest of CAE and that such purchases will constitute a desirable use of funds that should enhance shareholder value.

Caution concerning forward-looking statements

This press release includes forward-looking statements, including in connection with CAE’s NCIB, ARP and future purchases of common shares pursuant to the NCIB. Since forward-looking statements and information relate to future events or future performance and reflect current expectations or beliefs regarding future events, they are typically identified by words such as “anticipate”, “believe”, “could”, “estimate”, “expect”, “intend”, “likely”, “may”, “plan”, “seek”, “should”, “will”, “strategy”, “future” or the negative thereof or other variations thereon suggesting future outcomes or statements regarding an outlook. All such statements constitute “forward-looking statements” within the meaning of applicable Canadian securities legislation and “forward-looking statements” within the meaning of the “safe harbor” provisions of the United States Private Securities Litigation Reform Act of 1995.

By their nature, forward‑looking statements require us to make assumptions and are subject to inherent risks and uncertainties associated with our business which may cause actual results in future periods to differ materially from results indicated in forward‑looking statements. While these statements are based on management’s expectations and assumptions regarding historical trends, current conditions and expected future developments, as well as other factors that we believe are reasonable and appropriate in the circumstances, readers are cautioned not to place undue reliance on these forward-looking statements as there is a risk that they may not be accurate. The forward-looking statements contained in this press release describe our expectations as of June 5, 2026, and, accordingly, are subject to change after such date. Important risks that could cause such differences include, but are not limited to, those described in CAE’s Management’s Discussion & Analysis for the year ended March 31, 2026.

Specifically, there can be no assurance as to how many shares, if any, will ultimately be acquired under CAE’s NCIB. Except as required by law, we disclaim any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise. The forward-looking information and statements contained in this press release are expressly qualified by this cautionary statement. In addition, statements that “we believe” and similar statements reflect our beliefs and opinions on the relevant subject. These statements are based on information available to us as of the date of this press release. While we believe that information provides a reasonable basis for these statements, that information may be limited or incomplete. Our statements should not be read to indicate that we have conducted an exhaustive inquiry into, or review of, all relevant information. These statements are inherently uncertain, and investors are cautioned not to unduly rely on these statements.

Except as otherwise indicated by CAE, forward-looking statements do not reflect the potential impact of any special items or of any dispositions, monetizations, mergers, acquisitions, other business combinations or other transactions that may occur after June 5, 2026. The financial impact of these transactions and special items can be complex and depends on the facts particular to each of them. We therefore cannot describe the expected impact in a meaningful way or in the same way we present known risks affecting our business. Forward-looking statements are presented in this press release for the purpose of assisting investors and others in understanding certain key elements of CAE’s NCIB. Readers are cautioned that such information may not be appropriate for other purposes.

About CAE

At CAE, we exist to make the world safer. We deliver cutting-edge training, simulation, and critical operations solutions to prepare aviation professionals and defence forces for the moments that matter. Every day, we empower pilots, cabin crew, maintenance technicians, airlines, business aviation operators, and defence and security personnel to perform at their best and when the stakes are the highest. Around the globe, we’re everywhere customers need us to be with sites and training locations in over 40 countries. For nearly 80 years, CAE has been at the forefront of innovation, consistently seeking to set the standard by delivering excellence in high-fidelity flight simulators and training solutions, while embedding sustainability at the heart of everything we do. By harnessing technology and enhancing human performance, we strive to be the trusted partner in advancing safety and mission readiness–today and tomorrow.

Follow us on: LinkedIn | Facebook | Instagram | YouTube

CAE Contacts:
Media Relations:
Samantha Golinski, Senior Vice President, Communications
+1-438-805-5856, samantha.golinski@cae.com

Investor Relations:
Andrew Arnovitz, Chief Strategy Officer
+1-514-734-5760, andrew.arnovitz@cae.com

View original content:https://www.prnewswire.com/news-releases/cae-announces-renewal-of-normal-course-issuer-bid-302792276.html

SOURCE CAE Inc.

Continue Reading

Technology

TECNO Wins Two IFA Global Product Technology Innovation Awards for Modular Phone and Tonino Lamborghini TECNO TAURUS

Published

on

By

BERLIN, Sept. 5, 2026 /PRNewswire/ — TECNO, a global AI-driven innovative technology brand, achieved two IFA Global Product Technology Innovation Awards at IFA 2026:

Tonino Lamborghini TECNO TAURUS took the Miniaturized Gaming PC Technology Innovation Gold Award, standing out with its Italian aesthetics and exceptional performance in the compact body. The TECNO Modular Phone was honored with the Ultra-Slim Magnetic Modular Technology Innovation Gold Award, praised for its ultra-slim craftsmanship and unique modular magnetic technology.

These awards once again demonstrate TECNO’s sustained breakthroughs in product innovation and industry-leading craftsmanship in design excellence. The Global Product Technology Innovation Awards were established in 2014 by IDG, IFA, and DIHK to celebrate excellence across the global consumer electronics industry. The awards honor products that set new industry benchmarks and drive innovation through intelligent technology and user-centric design.

TECNO Modular Phone: The World’s Thinnest Modular Smartphone

At just 4.9mm, the TECNO Modular Phone is powered by proprietary Modular Magnetic Interconnection Technology. It combines a precision magnetic array with pogo-pin connectors, offering a flexible ecosystem for different needs. The host retains a 3000–4000mAh battery, while modules draw power directly for a snap-and-go experience. It also resolves the inherent conflict between rising AI computing demands and limited device space.

The technology has earned over 20 accolades from leading media, with CNET and Yanko Design naming it the Best of MWC 2026, and The Verge recognizing it as the Best Mobile Tech at MWC 2026.

Tonino Lamborghini TECNO TAURUS: One of the World’s Smallest Water-Cooling Gaming Mini-PCs

At around 6.36 liters, the panoramic transparent chassis of the Tonino Lamborghini TECNO TAURUS fuses iconic Italian design with raw engineering. Powered by the Intel® Core™ i9-13900HK and NVIDIA® GeForce RTX™ 5060 (614 AI TOPS, 145W TGP, DLSS 4), it achieves the pinnacle of performance, providing a high-fidelity gaming experience and high-efficiency AI workstation. The water-cooling system sustains peak frequencies, while 15 ports and WiFi 6E deliver connectivity. It was recognized with Yanko Design’s Best of MWC award.

In addition, TECNO made waves at IFA with the Next-Gen Bezelless Concept Phone featuring a revolutionary 0mm screen bezel, and the convertible laptop MEGABOOK T15 360 Pro. Relentlessly pushing the boundaries of design, performance, and AI innovation, TECNO is pioneering limitless possibilities for futuristic technology.

View original content to download multimedia:https://www.prnewswire.co.uk/news-releases/tecno-wins-two-ifa-global-product-technology-innovation-awards-for-modular-phone-and-tonino-lamborghini-tecno-taurus-302870739.html

Continue Reading

Technology

Morpho UV Printer Unveiled at IFA with Hands-On Live Creation

Published

on

By

BERLIN, Sept. 5, 2026 /PRNewswire/ — Morpho, a company specializing in UV printing technology, is showcasing its first desktop UV printer at IFA 2026, Hall 17-196. Visitors are observing Morpho’s colorful, textured prints, and some have the opportunity to print on a range of blank materials provided.

Morpho’s desktop UV printer can print on a wide range of materials, including wood, glass, leather, metal, and more, delivering vivid colors and tactile textures for customized results. At IFA 2026, the booth attracted interest from creators, educators, and technology professionals, who gathered to watch live demonstrations.

Among those who have tried Morpho’s printer, three aspects are most frequently highlighted: print quality, the moving gantry design, and overall ease of use.

Visitors are first drawn to the prints, which feature precise color reproduction and finely detailed textile textures. With G7 Master ColorSpace certification, Morpho ensures consistent tones across different pieces. The same level of precision is evident in the raised textures created by the industrial-grade printhead, which builds fine layers of ink for detailed, tactile surfaces. The printhead maintains fast carriage motion speeds of up to 600mm/s while preserving precise detail.

Attendees have also noted the printer’s compact desktop footprint. With its moving gantry architecture—where the entire gantry moves along both axes—the printer offers a large, fully enclosed print chamber that accommodates various objects while remaining desktop-friendly.

First-time users have given positive feedback on Morpho’s usability. The integrated Stereo Vision Smart Alignment™ System quickly captures an object’s height and contours, while Morpho Studio’s guided workflows help users move from idea to print with minimal setup.

Morpho’s team shared that the program has been in development for several years, with the goal of making UV printers a practical tool for everyday creative use. Founder Mingyu “Brett” Wang, formerly Global VP of R&D at DJI, commented, “We communicate directly with our community, listen to feedback, and make fast improvements.”

Ahead of IFA, Morpho’s Kickstarter campaign surpassed $10 million in support from over 2,800 backers worldwide. The company is committed to further developing its proprietary core technology and delivering reliable engineering for creators, makers, and small businesses.

Visit Morpho’s website to learn more.

About Morpho: Morpho develops desktop UV printers that bring industrial-grade printing and coloring to everyday materials, enabling creators to turn almost any physical surface into a canvas for their ideas.

View original content to download multimedia:https://www.prnewswire.co.uk/news-releases/morpho-uv-printer-unveiled-at-ifa-with-hands-on-live-creation-302870741.html

Continue Reading

Technology

Society of Robotic Surgery and Puma Venture Capital Announce Winners of SRS Shark Tank 2026

Published

on

By

Drive Medical claimed the top prize at the third annual SRS Shark Tank 2026, held during the Society of Robotic Surgery’s annual conference at the Diplomat Beach Resort in Hollywood, Florida. The event, a collaboration between SRS and Puma Venture Capital, once again showcased cutting-edge innovations in the digital and robotic surgery ecosystem and featured early-stage companies poised to transform minimally invasive care.

HOLLYWOOD, Fla., Sept. 5, 2026 /PRNewswire-PRWeb/ — Drive Medical claimed the top prize at the third annual SRS Shark Tank 2026, held during the Society of Robotic Surgery’s annual conference at the Diplomat Beach Resort in Hollywood, Florida. The event, a collaboration between SRS and Puma Venture Capital, once again showcased cutting-edge innovations in the digital and robotic surgery ecosystem and featured early-stage companies poised to transform minimally invasive care.

SRS Shark Tank 2026 featured presentations from nine innovative companies. Each had five minutes to pitch their technology and five minutes to engage in a Q&A session with a panel of esteemed judges, including top surgeons, investors, and medical device experts. Companies were evaluated on innovation, impact on healthcare, market potential, business model, and presentation.

Drive Medical earned the top honor for the Pollywog System, the first easy-to-use robotic endoscope integrated with artificial intelligence. The platform is designed to give physicians faster, safer access to the small bowel, allowing diagnosis and treatment to be completed in a single session rather than across multiple procedures.

DeepQure secured second place with HyperQure, the world’s first extravascular renal denervation system for resistant hypertension. Delivered laparoscopically, the device wraps the renal artery from the outside to achieve complete denervation while avoiding the vessel lining.

Microsure came in third with MUSA-3, a microsurgical robot that downscales and stabilizes a surgeon’s hand movements during open super-microsurgical procedures, including free flap, lymphatic, and peripheral nerve surgery. The system received CE mark approval earlier this year.

The strength of the 2026 field extended well beyond the podium: every one of the nine presenting companies was placed in the top three by at least one judge. Reveal Surgical presented optical imaging technology that characterizes tissue for tumor assessment during surgery, and Symphera demonstrated a laparoscopic system that lets surgeons switch instrument tips at the push of a button. Tioga Cardiovascular showed its transcatheter approach to mitral and tricuspid valve replacement.

CardioSentry presented an AI platform for autonomous cardiac ultrasound, and Nina Medical showcased a completely non-invasive treatment for benign prostatic hyperplasia. LITLab rounded out the slate with mobile, high-fidelity surgical training labs that travel to health systems and medtech companies to train clinical teams onsite. Together the group reflected an unusually broad and competitive slate, spanning robotics, imaging, structural heart, urology, and surgical education.

The 2026 judging panel included Steve Bell, Rob Morgan, Dr. Santiago Horgan, Dr. Erik B. Wilson, Scott Zinober, and Babak Tehranchi, and the event was co-chaired by Amit Hazan and Dr. Vipul Patel.

Participating companies included:

Microsure, Symphera, LITLab, Reveal Surgical, DeepQure, Drive Medical, Nina Medical, CardioSentry, and Tioga Cardiovascular.

About the Society of Robotic Surgery:

Founded in 2012, the Society of Robotic Surgery (SRS) is guided by the fundamental principles of education and collaboration as a means to tackle the complex issues of robotic surgery. The SRS’ membership includes more than 20,000 physicians of all disciplines from around the world whose mission is to share information related to multi-centric studies, database collection, fellowship training and funding support related to robotic surgery. The SRS is the only multi-specialty robotic surgery society in the world with an annual meeting that includes updates in more than a dozen medical sub-specialties along with state-of-the-art plenary sessions and hot topic courses.

About Puma Venture Capital:

Puma Venture Capital is an investment firm seeking to leverage its surgeon venture partners to invest in all aspects of physical intelligence across every medical procedure — to improve patient outcomes, lift labor productivity, and lower system costs.

Media Contact

Ryan Julison, Society of Robotic Surgery, 1 3213776877, ryanjulison@gmail.com

View original content:https://www.prweb.com/releases/society-of-robotic-surgery-and-puma-venture-capital-announce-winners-of-srs-shark-tank-2026-302869733.html

SOURCE Society of Robotic Surgery

Continue Reading

Trending