Connect with us

Technology

APsystems Achieves Key Safety Milestone with APstorage 261L UL 9540A Test Success

Published

on

SHANGHAI, Sept. 3, 2026 /PRNewswire/ — APsystems has reached a major safety milestone for its commercial and industrial (C&I) energy storage portfolio. Under the witness of TÜV Rheinland, the APstorage 261L liquid-cooled storage solution successfully passed the rigorous UL 9540A fire propagation test, demonstrating exceptional fire safety performance. During testing, thermal runaway was fully contained within a single cabinet, with no propagation to adjacent units, exceeding industry-standard safety requirements.

UL 9540A is widely recognized as one of the most stringent safety standards for energy storage systems worldwide. The test evaluates thermal runaway behavior at the cell, module, unit, and installation levels, measuring heat release, smoke generation, temperature rise, and system response to verify resistance to fire and explosion hazards.

Exceeding Industry Standards

The APstorage 261L storage cabinet was subjected to testing under extreme conditions, operating at 100% state of charge (SOC) with its fire suppression system intentionally disabled. Even under these demanding circumstances, no short circuit, fire spread, or explosion occurred, and the cabinet maintained its structural integrity throughout the test.

Key Test Results

Heat Flux: 0 kW/m² measured near the affected cabinet, significantly below the UL 9540A threshold of 1.3 kW/m², eliminating the risk of adjacent equipment ignition through thermal radiation.Maximum Module Surface Temperature: 83.9°C on both the affected and neighboring modules, demonstrating that thermal propagation between modules was effectively prevented.Maximum Adjacent Wall Temperature: 30.6°C, only 3.1°C above ambient temperature, confirming an almost negligible thermal impact on the surrounding environment.

At every stage of the test hierarchy, from cell to module to cabinet level, thermal runaway remained fully confined within a single enclosure, successfully preventing any propagation to neighboring cabinets.

Safety by Design

Safety is embedded into every aspect of the APstorage 261L’s design. The system features a single-cluster liquid-cooling architecture, maintaining cell temperature variation below 3°C to improve battery longevity while enhancing operational safety.

A comprehensive safety architecture combines:

4‑level fire‑protection systemActive ventilationPassive pressure relief mechanisms

Together, these elements create a robust, multi-layered safety framework that protects the system from the cell level through to the complete installation.

Compact, Flexible, and Optimized for European C&I Projects

Beyond its outstanding safety performance, the APstorage 261L has been engineered to support fast and flexible deployment across European commercial and industrial applications.

With a footprint of just 1.3 m², the system features plug-and-play connections for simplified installation and commissioning. Its modular architecture enables seamless parallel expansion across multiple cabinets, making it an ideal solution for industrial facilities, commercial buildings, and solar-storage-charging applications.

Supported by APsystems’ extensive European network and a dedicated C&I energy storage warehouse in the Netherlands, APstorage provides local product availability, professional training, and reliable on-site technical support.

As APsystems continues to expand its portfolio of end-to-end energy storage solutions, APstorage remains committed to delivering ever-higher levels of safety, performance, and reliability.

For more information, visit:

https://emea.apsystems.com/apstorage-ci/

View original content to download multimedia:https://www.prnewswire.co.uk/news-releases/apsystems-achieves-key-safety-milestone-with-apstorage-261l-ul-9540a-test-success-302867335.html

Continue Reading

Technology

TIMEX DECLARES TODAY ANALOG LIFE DAY

Published

on

By

A National Invitation to Get Off the Clock and Into Life

An unexpected opening in your calendar? Don’t fill it. Live it.

SHELTON, Conn., Nov. 13, 2026 /PRNewswire/ — Timex, the Official Timekeeper of Analog Life, is declaring today, Friday, November 13, Analog Life Day, and giving everyone a reason to do something increasingly refreshing: spend time actually living it. 

In a world that never stops scrolling, refreshing or asking for more of our attention, Timex is inviting people to take some of it back.

Take the long lunch. Call the friend you keep meaning to see. Leave your headphones behind. Wander somewhere without a plan. Say yes to something spontaneous. Make a memory that doesn’t need to be posted to count.  No productivity hacks. No screen time challenge. No perfectly planned itinerary.  Just a reminder that the best moments in life rarely happen between notifications. 

For more than 170 years, Timex has helped people keep time. Today, we’re reminding everyone what it’s for.

No registration. No download. No algorithm.

Just one day. Your time. Your way.

Make Time Yours.

Civic PR for Timex – timex@civic-us.com

View original content to download multimedia:https://www.prnewswire.com/news-releases/timex-declares-today-analog-life-day-302939026.html

SOURCE Timex

Continue Reading

Technology

BAE Systems selected as a mission-enabling space technologies partner for NASA PRIMA astrophysics program

Published

on

By

NASA Jet Propulsion Laboratory mission to survey the history and evolution of the universe and bridge current scientific gaps

BROOMFIELD, Colo., Nov. 13, 2026 /PRNewswire/ — BAE Systems (LON: BA) announced today that its Jet Propulsion Laboratory (JPL)-led PRIMA (PRobe far-Infrared Mission for Astrophysics) team has been selected by NASA for the next phase of development in NASA’s new class of “Probe Explorers” astrophysics missions.   

BAE Systems will provide its Evolve+ spacecraft bus for the mission, lead the observatory assembly, integration and test process, and serve as the operations and ground lead for NASA’s JPL, the manager of the mission.   

“We are excited to continue our decades-long partnership with JPL through the PRIMA mission that will enable NASA to make significant discoveries on the history of the universe,” said Bonnie Patterson, vice president and general manager of civil space for BAE Systems. “The PRIMA mission will also help fill observation gaps with other NASA astrophysics missions, including the James Webb Space Telescope and other observatories, also supported by BAE Systems.”  

NASA’s PRIMA mission will use a highly sensitive, far-infrared space telescope that is designed to see parts of the universe that are hidden by dust. Using a 1.8-meter diameter telescope, it will observe the cosmos in far-infrared light, bridging the critical observation gap between the James Webb Space Telescope and ground-based radio observatories.

The mission will help scientists learn how stars, planets, galaxies and even water formed over time. It will reveal how these cosmic structures grow and change, providing a clearer picture of how our universe developed and evolved from its formation to the present.  

The PRIMA mission is currently advancing through Phase B development and is targeted for launch in 2033 for a five-year mission. Following a NASA confirmation review, the project will move toward full implementation.

BAE Systems will join numerous international space industry providers to support the PRIMA mission, including those from France, Italy, Canada, South Korea, Japan and the UK.

Through the PRIMA mission, BAE Systems continues its longstanding support of NASA’s astrophysics programs. This includes work on the Hubble Space Telescope, Chandra X-ray Observatory, James Webb Space Telescope and the Nancy Grace Roman Space Telescope, among others.

For more information, please contact: 

Brian Rantala, BAE Systems 
Mobile: 720-995-8253 
brian.rantala@baesystems.us 

www.baesystems.com/en-us   
@BAESystemsInc  

View original content to download multimedia:https://www.prnewswire.com/news-releases/bae-systems-selected-as-a-mission-enabling-space-technologies-partner-for-nasa-prima-astrophysics-program-302938998.html

SOURCE BAE Systems, Inc.

Continue Reading

Technology

Why a Pocket Projector Could Be the Right Gift for Gamers and Sewists: Aurzen ZIP Pro

Published

on

By

IRVINE, Calif., Nov. 13, 2026 /PRNewswire/ — The friend who hosts game night and the maker who dreads taping sewing patterns together might appreciate the same unexpected gift: a pocket projector. Aurzen ZIP Pro, a CES Innovation Awards 2027 Honoree, brings shared fun and sewing pattern projection together in one foldable projector.

Unlike a fixed TV, ZIP Pro is a gaming projector that moves with the gathering. Its larger shared image brings everyone into the adventure, whether you’re sharing maps during tabletop RPG sessions or cruising through neon-lit city streets in the upcoming AAA open-world titles. Direct USB-C support for Nintendo Switch makes it a convenient dock-free projector, letting friends play together instead of crowding around a handheld screen. Wired Game Mode offers 20–40ms response times for casual co-op and party games.

Beyond game nights, ZIP Pro brings the same flexibility to your sewing table. As a sewing projector, it lets you skip printing, taping and storing paper patterns, leaving more time for working with fabric. Native 1080p DLP and ToF autofocus help keep fine outlines clear, while adjustable support and four-point correction help align the image with your cutting surface. With less setup between an idea and the first cut, this compact sewing pattern projector helps you turn your ideas into a finished piece with greater confidence.

The ZIP Pro Basquiat Special Edition Bundle pairs the same hardware with artwork from the Basquiat estate. It includes the projector, two custom art shells, a custom GoPlay portable case and a mounting suite with MagPlay Pro and Z-Stand in a special-edition gift box. The interchangeable shells offer two different looks, making it a personal choice for Basquiat fans.

During the promotion from Nov.19-30, ZIP Pro is $579.99 (regularly $629.99); ZIP Pro Basquiat Special Edition Bundle is $649.99 (regularly $679.99). Buyers can choose a complimentary GoPlay Carry Bag or Z-Stand, limited to 50 gifts in total, first-come, first-served. A sitewide prize draw offers shoppers a chance to get their order for free.

About Aurzen

Aurzen is a global innovator in smart projection technology. By combining advanced optical engineering with intuitive software and user-focused design, Aurzen delivers products that bring big-screen experiences to any space. The company pioneered the world’s first Tri-Fold Truly Portable Projector, ZIP, and its designs have been recognized with multiple international awards, including the iF Design Award, Red Dot Award, G-Mark Award, and IDEA Award. For more information, visit www.aurzen.com.

View original content to download multimedia:https://www.prnewswire.com/news-releases/why-a-pocket-projector-could-be-the-right-gift-for-gamers-and-sewists-aurzen-zip-pro-302938816.html

SOURCE Aurzen

Continue Reading

Trending