Connect with us

Technology

Toshiba Adds 24TB Capacity to N300 and N300 Pro Internal Hard Disk Drive Series

Published

on

TAIPEI , April 22, 2025 /PRNewswire/ — Toshiba Electronic Components Taiwan Corporation (Toshiba) has announced the addition of new 24TB[1] models to both its N300 and N300 Pro Series of internal hard disk drives (HDD). The new models offer 2TB more capacity than current 22TB versions, making them ideal for increasing the capacity of network attached storage (NAS) and private cloud storage. They are designed for 24/7 operation, feature industry-standard 3.5-inch[2] 7200rpm, 1 GiB[3] buffer, and include integrated sensors to compensate for rotational vibrations.

The N300 Series has a workload rating of up to 180TB/year[4] with support for up to 12 drive bays[5], while the N300 Pro Series boasts a workload rating of up to 550TB/year with support for up to 24 drive bays.

“Toshiba’s 24TB N300 and N300 Pro set new benchmarks in storage capacity and density, while also enhancing power efficiency through our advanced helium-sealed design,” says Noriaki Katakura, Division President, Storage Products Division, Toshiba Electronics Components Taiwan Corporation. “These models reflect Toshiba’s dedication to innovating HDD design to address the evolving storage demands for performance and small office NAS applications. With files continuing to grow in sizes, the 24TB capacity will allow NAS users to store and access large volumes of data more efficiently.”

The 24TB N300 and N300 Pro models started to ship this month.

For more information on the new products, please visit:
https://toshiba.semicon-storage.com/ap-en/storage/product/internal-specialty/nas.html

For more information on Toshiba’s full line of HDD storage products, please visit:
https://toshiba.semicon-storage.com/ap-en/product/storage-products.html

To receive more about our storage solutions, please follow @ToshibaStorage.Asia on Instagram.

###

[1]Definition of capacity: Toshiba defines a megabyte (MB) as 1 000 000 bytes, a gigabyte (GB) as 1 000 000 000 bytes and a terabyte (TB) as 1 000 000 000 000 bytes. A computer operating system, however, reports storage capacity using powers of two for the definition of 1GB = 230 = 1 073 741 824 bytes and therefore shows less storage capacity. Available storage capacity (including examples of various media files) will vary based on file size, formatting, settings, software and operating system, such as Microsoft Operating System and/or pre-installed software applications, or media content. Actual formatted capacity may vary.

[2]”3.5-inch” means the form factor of Hard Drives. They do not indicate drive’s physical size.

[3] 1 GiB = 1 073 741 824 B

[4]Workload is a measure of the data throughout of the year, and it is defined as the amount of data written, read or verified by commands from the host system.

[5]As for “Drive Bays Supported”, please contact your solutions provider because the compatibility with the host device will vary based on the RAID system.


* Information in this document, including product prices and specifications, content of services and contact information, is current and believed to be accurate as of the date of the announcement, but is subject to change without prior notice.

*Company names, product names, and service names may be trademarks of their respective companies.

About Toshiba Electronic Components Taiwan Corporation (TET)
Toshiba Electronic Components Taiwan Corporation is responsible for the sales and marketing promotion and support of Toshiba hard disk drives and Toshiba External HDDs in Taiwan, China and Southeast Asian countries. TET is the best partner to Enterprise server, storage and notebook computers, and its mission is to offer the best service and products embodying the highest quality and most leading-edge technology. For more information, visit us at:
http://toshiba.semicon-storage.com/ap-en/product/storage-products.html

About Toshiba Electronics Asia (Singapore)
Toshiba Electronics Asia (Singapore) (“TEA”) is under Toshiba Electronic Devices & Storage Corporation, a subsidiary of Toshiba Corporation. TEA was founded in 1990, and is responsible for the sales, marketing and services for Toshiba’s wide range of storage solutions in Asia Pacific, which includes the Canvio Portable External Hard Drives and Internal Hard Drives. TEA is the best partner to consumers and enterprises, and its mission is to offer the best services and products that embody the highest quality and cutting-edge technology. To find out more about TEA, visit:
https://toshiba.semicon-storage.com/ap-en/storage.html 

Photo – https://mma.prnewswire.com/media/2668928/N300andN300Pro.jpg
Logo – https://mma.prnewswire.com/media/2479685/Toshiba_Logo_Red_RGB_Logo_Logo.jpg

View original content:https://www.prnewswire.com/in/news-releases/toshiba-adds-24tb-capacity-to-n300-and-n300-pro-internal-hard-disk-drive-series-302433890.html

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Technology

“What If We Had This in 2020?” Data Viz 4 Good Bridges the Fortune 100 Data Gap for the Social Sector

Published

on

By

SAN FRANCISCO, May 5, 2026 /PRNewswire/ — Data Viz 4 Good (DV4G) today announced the launch of its ImpactIQ platform, a breakthrough SaaS solution transforming how the social sector visualizes mission-critical data.

For founders Tyra Jean and Vanessa Francesca Ortega, both Ronald E. McNair Baccalaureate Scholars, the mission began with a pivotal question: “What if we had Data Viz 4 Good at Syracuse University back in 2020?”

CEO Tyra Jean—a former Public Policy & International Affairs Fellow at UC Berkeley and current D.S.W. candidate at the University of Southern California—developed the concept after bridging two vastly different worlds. “I worked as a data consultant for Fortune 100 companies and saw firsthand the massive gap in data infrastructure across the nonprofit sector,” said Jean. “We’re bringing enterprise-grade technology to the organizations that need it most.”

This vision, combined with the duo’s technical pedigree, has positioned them as emerging leaders in the next generation of AI-powered social infrastructure and frontrunners for Forbes’ 30 Under 30.

The platform’s technical moat is anchored by the COO Vanessa Francesca Ortega — Posse Alumni, SU Remembrance Scholar, and Newhouse’s Dean Branham Scholar. She is the founder & CEO of Civic Trust Systems, the core operating system powering municipal-scale AI platforms, including HellogovAI Inc.

“ImpactIQ is built on infrastructure originally designed to power secure, large-scale government service delivery,” said Ortega. “Through Civic Trust Systems, I developed the AI delivery model and user experience architecture that enables platforms like Hellogov. We are now applying that same level of security and privacy to the social sector.”

By leveraging Civic Trust Systems, DV4G delivers government-grade security, privacy-first data handing, and scalable AI intelligence— without the complexity of cost of traditional enterprise systems.

As a free resource for the sector, the founders co-host a DV4G Podcast on Instagram (@DataViz4GoodHQ). The next episode explores how ImpactIQ’s privacy-first architecture not only protects sensitive community data but also strengthens grant readiness and institutional trust.

DV4G is currently scaling ImpactIQ for global researchers, nonprofits, and mission-driven organizations seeking to modernize how they measure and communicate impact.

Unlock the full impact of your data at DataViz4Good.org.

Media inquiries: contact@dataviz4good.org

View original content:https://www.prnewswire.com/news-releases/what-if-we-had-this-in-2020-data-viz-4-good-bridges-the-fortune-100-data-gap-for-the-social-sector-302763285.html

SOURCE Data Viz 4 Good

Continue Reading

Technology

QuickLogic to Showcase EOS™ S3 and eFPGA Solutions at Sensors Converge

Published

on

By

SAN JOSE, Calif., May 5, 2026 /PRNewswire/ — QuickLogic Corporation (NASDAQ: QUIK) will showcase its EOS™ S3 SoC and eFPGA solutions at Sensors Converge 2026, taking place at the Santa Clara Convention Center. Attendees can visit Booth 1039 to see how developers can build always-on, ultra-low power sensor and voice-enabled systems with greater flexibility and faster time-to-market.

At the booth, QuickLogic will highlight the EOS™ S3, a fully integrated platform designed for concurrent voice, motion, environmental, and biometric sensing. With its built-in low-power sound detection, Arm® Cortex®-M4F processor, and embedded FPGA, the EOS™ S3 enables developers to implement custom hardware acceleration while minimizing power consumption—ideal for battery-operated and always-on applications.

Date: May 6 and 7, 2026

Booth: 1039

Exhibit Hours:

Wednesday, May 6: 10:00 AM – 5:30 PMThursday, May 7: 10:00 AM – 4:00 PM

About QuickLogic
QuickLogic Corporation is a fabless semiconductor company specializing in eFPGA Hard IP, Strategic Radiation Hardened and Antifuse FPGAs and ruggedized programmable logic solutions. QuickLogic’s unique approach combines cutting-edge technology with open-source tools to deliver highly customizable, low-power solutions for aerospace and defense, industrial, computing, and consumer markets. For more information, visit www.quicklogic.com.

QuickLogic and logo are registered trademarks of QuickLogic. All other trademarks are the property of their respective holders and should be treated as such.

View original content to download multimedia:https://www.prnewswire.com/news-releases/quicklogic-to-showcase-eos-s3-and-efpga-solutions-at-sensors-converge-302763291.html

SOURCE QuickLogic Corporation

Continue Reading

Technology

PIRELLI WILL START CYBER™ TYRE PRODUCTION IN GEORGIA UNDERLINING THE STRATEGIC IMPORTANCE OF THE U.S. MARKET

Published

on

By

Pirelli further strengthens its commitment to the country. Investment and output expansion details will be communicated in the coming months following the finalization of the development plans

MILAN and WASHINGTON, May 5, 2026 /PRNewswire/ — Pirelli is reinforcing its long-term commitment to the United States with a key step in its product and industrial strategy. The Georgia plant, already dedicated to the most technologically advanced products for the U.S. market—both in the High-Value segment and in Motorsport—will be further enhanced by the production of connected tires featuring Cyber™ Tyre technology. This development highlights the strategic importance of the U.S. for Pirelli’s global growth roadmap, strengthening the company’s integrated industrial and technological presence in the country.

The announcement comes as Pirelli participates in the SelectUSA Investment Summit, the flagship event promoted by the U.S. Department of Commerce, where Cyber™ Tyre is being showcased as a core innovation shaping the future of smart mobility. 

Cyber™ Tyre is the world’s first hardware-and-software system capable of collecting data and information from sensors embedded in tires, processing them through Pirelli’s proprietary software and algorithms, and, by communicating in real time with the vehicle’s electronics, enabling new functionalities integrated with driving and control systems to enhance the driving experience and increase safety levels, as well as supporting connected infrastructure.

In a highly advanced market such as the United States, where digital and smart mobility solutions are rapidly expanding, Cyber™ Tyre represents a distinctive competitive advantage for Pirelli.

At SelectUSA, Cyber™ Tyre was showcased at the Georgia State booth, a particularly meaningful presence given Pirelli’s industrial footprint in the state, where it has been established for more than 20 years.

“The start of Cyber™ Tyre production in our Rome, Georgia plant is a significant milestone for Pirelli in this country,” said Claudio Zanardo, CEO of Pirelli North America. “It reflects our commitment to bringing advanced technologies like Cyber™ Tyre closer to the market, further strengthening our industrial footprint and innovation capabilities in the United States.”

To further enhance the role of Rome as a high-tech production site, Pirelli is finalizing the introduction of the latest version of the MIRS (Modular Integrated Robotized System) production process. It will be the most advanced manufacturing process for high-end, premium production within the entire Pirelli Group, and is exclusive to the Georgia factory. The process further enhances robotized production capabilities, increasing productivity, flexibility, and quality.

It is a highly digitalized system that enables a direct link between product design and its industrial application.

This development lays the groundwork for growth in Pirelli’s production capacity in Rome, an integral part of the Group’s industrial development plans, and will further strengthen Pirelli’s presence in the United States—one of its most important and strategic markets.

The Rome, Georgia, plant specializes in high-value tire production for the North American market. It also hosts a dedicated R&D center, further strengthening its role in technological development and product innovation.

The facility is recognized for its responsible sourcing practices, including the use of FSC® (Forest Stewardship Council®)-certified natural rubber, underscoring the company’s broader environmental commitment across its supply chain.

www.pirelli.com

View original content to download multimedia:https://www.prnewswire.com/news-releases/pirelli-will-start-cyber-tyre-production-in-georgia-underlining-the-strategic-importance-of-the-us-market-302763293.html

SOURCE Pirelli North America

Continue Reading

Trending